510 Front window seal

[DatMo]

Any recommendations? I want the one preferably with the chrome trim. The Thailand one seems cheap but as long as it fits well I'll be happy. Anyone wanna do it for me? I'm in Torrance! Haha. I've never done it alone and don't wanna risk a crack.

[MicroMachinery]

.... don't wanna risk a crack.

 

 

Sorry about your luck.

[Dattokai]

Mods asleep, post cracks!

[Draker]

I bought a Vintage Rubber gasket. It hasn't cracked yet, but it is on a car that is garaged 96% of the time. It was a precision seal.. which was made in Thailand. 

[fivetenguy]

Draker, I too have a Precision front rubber. I've had it for 14 years and it's still very soft. Just like you, it's on a car that's garaged about 98% of the time. I've always been very pleased with Precision seals.

[carterb]

For seals, you can try www.datsport.com

 

Or look for Precision Replacement Parts, they have windshield seals only.  www.prp.com 

Part number is WCR204 (accepts trim) and WBL204 (does not accept trim)

 

Not sure if they sell direct (call them) but many sellers offer their parts, here is one for example.

http://www.autopartswarehouse.com/search/?Ntt=prpwcr204&searchType=global&shopId=1&N=0&addfitment=1

 

I used the PRP seal with a daily driver / non garaged and it did NOT show any signs of hardening or cracking after a few years.

--carter

[DatMo]

For seals, you can try www.datsport.com

 

Or look for Precision Replacement Parts, they have windshield seals only. www.prp.com

Part number is WCR204 (accepts trim) and WBL204 (does not accept trim)

 

Not sure if they sell direct (call them) but many sellers offer their parts, here is one for example.

http://www.autopartswarehouse.com/search/?Ntt=prpwcr204&searchType=global&shopId=1&N=0&addfitment=1

 

I used the PRP seal with a daily driver / non garaged and it did NOT show any signs of hardening or cracking after a few years.

--carter

I may just go with precision then just because I will be dd my car. Thanks for the input guys! Super nice

[russaroll]

don't get one from Vintage Rubber.  they sent me the wrong one twice.

[Draker]

don't get one from Vintage Rubber.  they sent me the wrong one twice.

They sent me a precision gasket and claimed they made it.

[Draker]

And they charged about 20 or 30 bux more than you can get them anywhere else.. I was under the impression it would bw their own product.