jboulukos Posted July 11, 2016 Report Share Posted July 11, 2016 I recently purchased an EGR block off delete plate from Ebay. Here's pictures of the old home-made one and the new one. It was listed as a 1975-83 280Z block off plate and also fits the B210. Came with a gasket too. Old New 1 Quote Link to comment
Tolkmod Posted July 11, 2016 Report Share Posted July 11, 2016 nice... looks clean 1 Quote Link to comment
jboulukos Posted July 11, 2016 Author Report Share Posted July 11, 2016 nice... looks clean Thanks. trying to button everything up. 1 Quote Link to comment
dat521gatherer Posted July 12, 2016 Report Share Posted July 12, 2016 That is great. Here is what I did for my a series. I took it all off at the closest point on the manifold and made a temporary wooden one using the gasket as a template. I eventually posted a ad wanting someone to flowjet a plate but had a great member just cut one out of 1/4? with shop tools. I also did this on my l20b and added a hole for the pcv valve. If anyone reading goes this route you have to get a exhaust block off plug for the bottom of the manifold. 1 Quote Link to comment
jboulukos Posted July 12, 2016 Author Report Share Posted July 12, 2016 pretty solid! 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.