Restarting Project Brownie

[bmacster]

I decided to continue onwards with the truck project instead of selling it. Since the last update, I've put on about 10k miles on the beast and she is still going fairly strong. She was sadly stored outside in the winter for 3 months during a move and the cab was full of water from both sides. 

 

There are still the remaining issues from before -

 

Fenders needs to come off to clear the water passages

Front passenger CV boot ripped on an outing last week

Passenger door still needs to be replaced

Floor boards needs to be replaced badly

Interior needs to be put back together and finished (car

Windshield needs to be replaced

Fuel pump and relay needs to be connected again

Need to get a Weber carb

Also need to get new tires

...and new steering box so I can get an alignment... 

Motor and transmission will eventually need to be pulled and replace the oil pan gasket and most likely the rear main seal. Can't figure out where the rest of the leak is coming from.

Front and rear differentials also leaking from the seals

 

Mostly little things that will take time due to my work schedule. Pictures and such to come! 

Where would be a good place to get some of the items above? Rockauto didn't have most of what I need anymore.

 

Thanks again!

[Draker]

Post an ad in the classifieds and you should be able to find most of that stuff.

[bmacster]

Post an ad in the classifieds and you should be able to find most of that stuff.

Right on, thanks!

[racerx]

There was a guy selling a 32/36 weber not too long ago.  Have you checked the classifieds?