Nissan J15 Engine valve adjustment

[itsallgood]

i am looking to adjust the valves on my j15

i found this info.

http://www.theforkliftengineco.com/nissan-j15-specs.html

is the gap i need 

Intake Clearance .010 hot

 

 

 

will this walk threw work for the J15

http://datsun1200.com/modules/mediawiki/index.php?title=Valve_adjustment

 

 

thanks for any help.

[datzenmike]

 

http://www.theforkliftengineco.com/nissan-j15-specs.htm  I don't see any valve clearances listed.

 

 

http://datsun1200.com/modules/mediawiki/index.php?title=Valve_adjustment   While the J and the A series are similar and both are push rod they aren't the same. The Haynes 620 repair manual has the J13 engine listed and most likely the valve clearances. 

[itsallgood]

would you happen to have the valve clearance? so i don't have to pay for the manual. 

[Charlie69]

You can find most information on the Internet.  Look for manuals in the .pdf format they are usually downloadable for free.

[itsallgood]

You can find most information on the Internet.  Look for manuals in the .pdf format they are usually downloadable for free.

thank you. found it. pdf was the way.