HKS Posted June 9, 2016 Report Share Posted June 9, 2016 Can someone take a measurement of a 510 with an SR20DET from the inner shock tower to the end of the intake manifold flange where the head bolts up to. I am looking to make a custom ITB setup and need to make sure I have enough room (length wise). Also from middle of the port runner to the top of the shock tower to determine maximum height allowable for the hood to properly close. Thanks in advance. Quote Link to comment
510T Posted June 12, 2016 Report Share Posted June 12, 2016 It looks like you have about a foot of room from the head to the shock tower. From the middle of the runner to the top of the shock tower about 5". There may be more or less depending on how you mount the engine. Quote Link to comment
HKS Posted June 13, 2016 Author Report Share Posted June 13, 2016 Thank you for the info! Quote Link to comment
DISLEXICDIME Posted June 13, 2016 Report Share Posted June 13, 2016 The mounts and cross member will change the measurement what mounts and x member do you have Quote Link to comment
HKS Posted June 17, 2016 Author Report Share Posted June 17, 2016 Planning on using Mckinney poly mounts Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.