Do yours look like this? NGK Wires HE64

[510Goonies]

Picked up a set of NGK wires from Rockauto, just curious if your HE64 wires look like this? Is this normal or did I get an off set?

[datsunfreak]

All of the NGK L-series wires are like that. 

 

As I recall, one of the wires has an interference issue, so it has that elbow for better clearance. 

[banzai510(hainz)]

most are laboled 1 2 3 4

#1 is the angled one

 

 1is in front

4 is the firewall one. 2 and 3 I think you can figure out

[datsunaholic]

The angle is so you don't interfere with the lifting bracket.  Of course if your lifting bracket is missing it seems weird to have that plug wire angle.  But the NGK sets I've gotten all had that angle for #1 plug.

[datzenmike]

Same here. But who would lift an engine with the easily broken cap still on?

[510Goonies]

Okay! Thanks guys! My slight OCD of having things all look the same was starting to kick in but if they are made like that for a reason then I guess it's okay lol

[spdcrazy]

pretty sure I used it on number 4. seemed to be the best location for it, although I might be mistaken. my OCD was giving me problems as well.

 

crap, there it kicks in again, thanks pal! haha

[racerx]

Many moons ago when i started buying ngk wires,i first thought the angled one was for the coil.