Where should I buy replacement parts for my 67 Pick-up

[FunkyFresh520]

 

My bro has told me about Rockauto.com and i dont really trust autozone but i want/ need your guys recommendations on these parts that i will be replacing soon. I want to avoid cheap parts or parts that dont fit from your experience since im a newbie. I wanna get the parts that will get the job done and avoid junk.. brands and websites will help thanx guys

[datzenmike]

If you can find out if the parts are Made in Japan, this helps. Alternators are $250 and up at the dealer so that $60 replacement is actually.... junk. I find that wrecking yard parts are usually better even though used. Brake, clutch and slave cylinders are often cheap knock-offs too. Often your originals are totally rebuildable IF you can source good quality build kits. I did this with my 15/16 zx master.

[FunkyFresh520]

If you can find out if the parts are Made in Japan, this helps. Alternators are $250 and up at the dealer so that $60 replacement is actually.... junk. I find that wrecking yard parts are usually better even though used. Brake, clutch and slave cylinders are often cheap knock-offs too. Often your originals are totally rebuildable IF you can source good quality build kits. I did this with my 15/16 zx master.

Thanx for the input mike

[thisismatt]

Agree with Mike. Front inner bearings are impossible to find. Check with member mklotz about a work around. Likely you'll need new kingpins too, and the kits can often be found on eBay. Alternator - you're best off swapping to a newer internally regulated and bypass the stock external regulator.

[FunkyFresh520]

Agree with Mike. Front inner bearings are impossible to find. Check with member mklotz about a work around. Likely you'll need new kingpins too, and the kits can often be found on eBay. Alternator - you're best off swapping to a newer internally regulated and bypass the stock external regulator.

Thank u bro ✌