murdrdatsoon72 Posted February 23, 2016 Report Share Posted February 23, 2016 I have gone with the 280zx (81) upgrade on my 72 510 wagon. I have followed this forums advice and Dime Quaterly. I installed 84 300zx hubs for the wider track. I wasnt sure what caliper to use since I had a 300zx hub I ordered rotors and calipers to match. My problem is that the mouting holes for the calipers dont match on the 280zx strut. Can someone tell me what caliper combination will work with this setup. Quote Link to comment
datzenmike Posted February 23, 2016 Report Share Posted February 23, 2016 Probably just use 280zx calipers and rotors. The 300zx hub merely moves the rim outward. 1 Quote Link to comment
flatcat19 Posted February 23, 2016 Report Share Posted February 23, 2016 ^ That. Longer wheel studs and spacers to finish off your stance. Quote Link to comment
murdrdatsoon72 Posted February 23, 2016 Author Report Share Posted February 23, 2016 Thanks for the advice. I am returning all the 300zx parts and now searching for 280zx hubs. Should I be concern on what year? I ordered new calipers, rotors and pads (280zx) from Amazon. Quote Link to comment
datzenmike Posted February 24, 2016 Report Share Posted February 24, 2016 Front calipers/rotors were the same for all years of zx. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.