Elkie Posted February 7, 2016 Report Share Posted February 7, 2016 Gonna be making a custom driveshaft, I found that the d21 uses a 1310 ujoint, but does it use a 22/24 spline to fit into a 240sx tranny? Quote Link to comment
Rjawm Posted February 7, 2016 Report Share Posted February 7, 2016 If understanding your post correctly, you're taking about the output yoke attached to the transmission end of the driveshaft, correct? I'd say if this works, a 240sx output yoke into a 1995 D21 trans the opposite should be possible. And just in case you wanted to zoom in and count it out. Quote Link to comment
Elkie Posted February 7, 2016 Author Report Share Posted February 7, 2016 Thanks, I thought it would but wanted to make sure before I made a 2 hour round trip and pulled a driveshaft. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.