Jump to content

510 Wiper wiring ??


AIShelby

Recommended Posts

  • Replies 5
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

You need a three position switch with on to each side and an off position in the middle or center position. May be called a SPCO or Single Poll Center Off switch.

 

 

High .. This terminal connected to the  Blue/White strip wire.

 

OFF... Common or connected to ground. In the High position the Blue/White wire is grounded. In Low position the Blue wire is grounded.

 

Low .. This terminal connected to the Blue wire.

 

Just splice INTO the 510 switch wiring leaving the switch in the off position. If you disconnect the 510 wiper switch, when the center OFF position is selected the wiper arms will NOT park at the bottom of the windshield.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.