wheels for 68 520

[itsallgood]

it seems to be really hard to find wheels for r trucks. that just bolt on.

i am looking for a set that will not have to be milled and bolt right up.

i have rotors on all for. the truck is on air so i was wondering what width of wheel i can run. so my wheels tuck in the fender?

dose anyone know the exact center bore?

 

can anyone tell me if these will fit, are they to wide or can i go wider?

http://www.summitracing.com/parts/usw-70-7760

 

thanks for the help.

[kelowg]

U need like 30-35mm +offset(fwd offset) maybe more or wheel spacer to clear. Front stock hubs have four tabs? 521's do, grinded those down to fit my old escalade wheels. Xterra nismo wheels tuck even with 1/4in spacers. But only 16x7.

[datzenmike]

Correct. It isn't so much the rim/tire width, but what the rim setback is. I'm glad to see someone asking rather than buying rims and then trying to make them fit.

 

Here try messing with this... https://www.rimsntires.com/specspro.jsp

 

Take some measurements on your stock rims and how much fender clearance you have plug it in and try varying rim and tires

[itsallgood]

Correct. It isn't so much the rim/tire width, but what the rim setback is. I'm glad to see someone asking rather than buying rims and then trying to make them fit.

 

Here try messing with this... https://www.rimsntires.com/specspro.jsp

 

Take some measurements on your stock rims and how much fender clearance you have plug it in and try varying rim and tires

so if i mount 18x10 wheels with the right offset will they stick out past the fender? that is what i don't want.

[datzenmike]

I have no idea.

 

 

 

 

Here try messing with this... https://www.rimsntires.com/specspro.jsp

 

Take some measurements on your stock rims and how much fender clearance you have plug it in and try varying rim and tires