JDOM310 Posted April 18, 2017 Report Share Posted April 18, 2017 Try this..." You found what?!!!! Parked in the garage?!!!? Now way!!!!! Might as well keep it?" Quote Link to comment
JDOM310 Posted April 18, 2017 Report Share Posted April 18, 2017 Or just play it cool and pretend you discussed it before she left Quote Link to comment
datsunfreak Posted April 18, 2017 Report Share Posted April 18, 2017 Or just play it cool and pretend you discussed it before she left "Oh no honey, that car has always been there. You just now noticed it?!?" Quote Link to comment
JDOM310 Posted April 18, 2017 Report Share Posted April 18, 2017 Or it was a gift from ratsun.net and it would be rude to give it back. So anyone ever have their b210 on TOSCO WHEELS? Quote Link to comment
datsunfreak Posted April 19, 2017 Report Share Posted April 19, 2017 So anyone ever have their b210 on TOSCO WHEELS? Probably not. They are Toyota wheels. :rofl: They were popular with some of the TS Cup racers back in the 70s/80s, but only on the B110 and B310. Quote Link to comment
JDOM310 Posted April 19, 2017 Report Share Posted April 19, 2017 They are Toyota but very cool. Ya I like those ts cup racers keep forgetting thia was a b210 thread Quote Link to comment
gene knight Posted April 19, 2017 Report Share Posted April 19, 2017 Kelmo: I will try that trick. But she's to smart to believe that. Quote Link to comment
gene knight Posted April 19, 2017 Report Share Posted April 19, 2017 So went to 3rd party and got plates and title in my name. 2 Quote Link to comment
B2Fresh Posted April 21, 2017 Author Report Share Posted April 21, 2017 Sweet.. Congrats on getting a step closer to cruising that "B"... Quote Link to comment
gene knight Posted April 21, 2017 Report Share Posted April 21, 2017 here is latest updates on my b210. got new shoes/tires. redid the grill section with gloss black and red and tail light panel section removed everthing and painted flat black 1 Quote Link to comment
gene knight Posted April 24, 2017 Report Share Posted April 24, 2017 Well took the b210 to brakes plus, apparently they made it worse, whoever replaced the master cylinder probably didn't do a good job bench bleeding the unit before installing it and a lot of air in the air system i will have to remove and get the tank clean and flush the fuel lines as well to see if it will run better and boost up brake output pressure Quote Link to comment
JDOM310 Posted April 27, 2017 Report Share Posted April 27, 2017 Found a great deal on some advan wheels old school not sure about offset thought anyone point me in right direction? Quote Link to comment
Jcooper Posted April 27, 2017 Report Share Posted April 27, 2017 Great job gene! Quote Link to comment
mhub91 Posted April 29, 2017 Report Share Posted April 29, 2017 Big changes coming to my B. Swapping in a LZ23 with side drafts Mikunis. Full coilovers, big brake setup with slotted / drilled rotors. Hoping it will be a blast to drive! 2 Quote Link to comment
Cosmonaut Posted April 30, 2017 Report Share Posted April 30, 2017 Getting ready to install an A14 Nissan EGI in my 77 Hatch...going to b fun. Quote Link to comment
mhub91 Posted April 30, 2017 Report Share Posted April 30, 2017 I have would love to see the manifolds for that setup. Would be cool to turbo that engine. Quote Link to comment
Cosmonaut Posted April 30, 2017 Report Share Posted April 30, 2017 I will post pics later today, and yes it will be turbo'd n intercooled. Quote Link to comment
Sierra Posted April 30, 2017 Report Share Posted April 30, 2017 At Cosmonaut, you should start an A14 Nissan EGI thread. Its not every day that we see a built as such. Quote Link to comment
Cosmonaut Posted May 1, 2017 Report Share Posted May 1, 2017 Coming soon, a project build near you. Even though the factory accesories are pictured, I well be going with a Megasquirt ECU. Quote Link to comment
Sierra Posted May 2, 2017 Report Share Posted May 2, 2017 What head are you going to use on your A series EGI built Cosmonaut? Are going with the OEM cast-iron exhaust manifold? or exhaust headers? Coming soon, a project build near you.Even though the factory accesories are pictured, I well be going with a Megasquirt ECU. Quote Link to comment
Cosmonaut Posted May 2, 2017 Report Share Posted May 2, 2017 This Shipped from Australia. Understood the company to be good quality. Of course I will need to manipulate it to work with a turbo:-) I had my hands on a descent turbo exhaust manifold, but alas it slipped thru my fingers. If another one happens to come my way or if I decide to invest the money in a custom one...*Mattndew76* will be involved. I am having my existing oval port head ported. It will have the exhaust port near the thermostat plugged. I am installing dual springs on it also. Quote Link to comment
Cosmonaut Posted May 2, 2017 Report Share Posted May 2, 2017 I have been trying to pickup an A14T head for the project...but no luck so far. I have been following several A series turbo projects on *datsun1200.com* the head to them (they race theirs) does not seem to matter as much as one would think. But I do want it to breathe sufficiently. Quote Link to comment
Cosmonaut Posted May 2, 2017 Report Share Posted May 2, 2017 I will be running an e15t Turbo or One turbo from a 300z twin turbo set. Not sure yet. I want to buy a new turbo (ya, I know they are spendy) to avoid any distractions in tuning this thing in. I do not plan on going over 12lbs boost. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.