ByStickel Posted September 26, 2015 Report Share Posted September 26, 2015 I'm working on an upgrade for 510/610 IRSs and I can't seem to find the exact drum face to drum face (wheel mounting surface) width for the stock set-up. Does anybody have that? Am I correct to assume that the most popular disk conversions alter that dimension only slightly? Thanks! Quote Link to comment
shacks510 Posted September 26, 2015 Report Share Posted September 26, 2015 The thickness of the wheel mounting surface of the 200sx discs I have is 7.45mm. That's all I can provide this second. 1 Quote Link to comment
ByStickel Posted September 26, 2015 Author Report Share Posted September 26, 2015 That's a start, thanks. Quote Link to comment
Lockleaf Posted September 26, 2015 Report Share Posted September 26, 2015 OK so here's a chain of logic you can choose to reject. 280zx track width is 53". 280zx wheel offset is 0, so teach width is also wms. According to Datsunfreak, 280zx rear end is 2.5" wider than a 510 wagon. So 510 wagon is about 50.5" wide. Since 510 IRS swapped wagon owners never seen to complain about wierd offset issues, we can assume that the wagon rear end is essentially same width. So in closing, 510 rear end width IRS WMS is 50.5" 1 Quote Link to comment
ByStickel Posted September 27, 2015 Author Report Share Posted September 27, 2015 I'll trust, but verify, that logic (; Thanks. I'm sure that's super close, if not dead-nuts on. Quote Link to comment
Lockleaf Posted September 27, 2015 Report Share Posted September 27, 2015 Please do verify. I always mock people who just take my word for it. I make things up. :) Here's where Datsunfreak referenced the comparison. http://community.ratsun.net/topic/67322-goon-rear-end/ Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.