dabby dunkerton Posted July 7, 2015 Report Share Posted July 7, 2015 hey i posted this topic on electrical earlier but no one replied so i moved it here: Can either someone whos already done this post a picture of the hole they had to cut or someone with a 240z show my a picture behind the turn indicators? i really love the look of the 240z indicators and would like them on my car, if any on here has done it let me know. also is it plug and play or is some sodering needed to be done? any information is Greatly appreciated! Quote Link to comment
datzenmike Posted July 7, 2015 Report Share Posted July 7, 2015 I removed the other post. The problem with multiple posts on the same thing is multiple answers from multiple members that don't know about the other post. The don't get an answer, the answers conflict, and so on. Better to have just the one. Might work if you swap the complete lower valance with the lights on it. Also loose that hideous 280z front bumper and swap a 240 bumper on as well. Quote Link to comment
metalmonkey47 Posted July 7, 2015 Report Share Posted July 7, 2015 It can be done, dunno much about it myself, but it involves swapping bumpers and lower valence as well. Quote Link to comment
FlannelFairlady Posted July 11, 2015 Report Share Posted July 11, 2015 I have done it myself on my Z. It isn't that hard. You will need some bulb harnesses from a 240z and you will need to splice your 280 turn signal connectors onto them. Asides from that you just need the housings, and a valance or airdam. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.