bonvo Posted February 4, 2018 Author Report Share Posted February 4, 2018 then i worked on it a little here a little there as time allowed usually 1 afternoon a week build will yield 9.5:1 compression cam specs are as follows Duration Advertised 278° Intake/288° Exhaust Duration @ .050'' 204° Intake/214° Exhaust Lift @ Valve .420'' Intake/.442'' Exhaust Lift @ Cam .280'' Intake/.295'' Exhaust Lobe Separation Angle 112° Intake Centerline 107° Intake Timing @ .050" Open 5° ATDC Close 29° ABDC Exhaust Timing @ .050" Open 44° BBDC Close 10° BTDC Vacuum @ 1000RPM Idle 14" based on similar builds ive seen as well as engine masters building a slightly tamer 350 this should make anywhere from 370-400 hp and 400-425 tq any bets on how long the turbo 350 lasts? 2 Quote Link to comment
bonvo Posted February 4, 2018 Author Report Share Posted February 4, 2018 been waiting for a dry weekend to drop it in but i did keep working on the light wiring not done yet a few more wires to run then wrap it all up nice and neat 2 Quote Link to comment
]2eDeYe Posted February 4, 2018 Report Share Posted February 4, 2018 Nice motor. :devil: 1 Quote Link to comment
bonvo Posted April 2, 2018 Author Report Share Posted April 2, 2018 here we go last weekend i finally got down to business 3 Quote Link to comment
bonvo Posted April 30, 2018 Author Report Share Posted April 30, 2018 home stretch tomorrow carb gets finalized prime the oil system stab the distributor run plug wires and turn the key! 4 Quote Link to comment
bonvo Posted April 30, 2018 Author Report Share Posted April 30, 2018 also finished my offroad lights low beams high beams fogs leds all on 3 Quote Link to comment
]2eDeYe Posted April 30, 2018 Report Share Posted April 30, 2018 Those are some bright lights. 1 Quote Link to comment
bonvo Posted May 1, 2018 Author Report Share Posted May 1, 2018 Those are some bright lights. not bad for amazon 36 dollar specials and you get 8 of them i only used 6 of them on the truck i will definitely buy them again 2 Quote Link to comment
datzenmike Posted May 1, 2018 Report Share Posted May 1, 2018 Got a picture of the LEDs? from the front. 1 Quote Link to comment
bonvo Posted May 2, 2018 Author Report Share Posted May 2, 2018 actually i do 2 Quote Link to comment
bonvo Posted May 7, 2018 Author Report Share Posted May 7, 2018 i have an ear to ear smile right now little worred about the cam since i had to shut it down twice due to plug wires melting but all seems ok now just re tq the heads and tune it 2 Quote Link to comment
Dguy210 Posted May 10, 2018 Report Share Posted May 10, 2018 Nice man! She sounds real good. 1 Quote Link to comment
bonvo Posted May 10, 2018 Author Report Share Posted May 10, 2018 now if i can just figure out why the trans doesnt wanna shift lol i think its either the kick down cable not being adjusted right or the vac modulator on the trans has a kinked line 1 Quote Link to comment
]2eDeYe Posted May 10, 2018 Report Share Posted May 10, 2018 I think it has something to do with taking the truck apart and putting it back together :fu: Sounds fucking great :cool: 1 Quote Link to comment
bonvo Posted May 11, 2018 Author Report Share Posted May 11, 2018 it was the kick down cable not being adjusted right 2 Quote Link to comment
Charlie69 Posted June 1, 2018 Report Share Posted June 1, 2018 Just ran across this build sweet! 1 Quote Link to comment
bonvo Posted June 4, 2018 Author Report Share Posted June 4, 2018 new taylor wires almost a perfect match for the body color other then minor tuning (still more to do need a new vac diaphram for the dizzy) just been enjoying the truck some random shots ive taken someone needs to throw rosie some mardi gra beads Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.