Anonymous Waffle Posted June 10, 2015 Report Share Posted June 10, 2015 Turn signals are not working at all, no click or lights. Yes the 4 way flasher is entirely working, i have both flasher and hazard cans, connectors have been cleaned and the fuse box has been cleaned. Is there a ground wire that is supposed to be wired to the turn signal switch on the steering column? Quote Link to comment
paradime Posted June 10, 2015 Report Share Posted June 10, 2015 What year 510? Older 510 diagramn Quote Link to comment
datzenmike Posted June 10, 2015 Report Share Posted June 10, 2015 Turn the turn signals on with the key on, then turn the 4 way flasher switch on, off, on, off several times. This will clean the contacts and when in the 'off' position if the turn signal starts working , you will know it. The 4 way switch has to disconnect the turn switch and connect all the lamps to the 4 way flasher. When shutting it off, the turn signals have to be re-connected. This switch does not get much use and may have poor connection. Do your OIL and IGN lights work when you turn the key to ON? If not the fuse may be blown Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.