dscottdatsun Posted April 18, 2015 Report Share Posted April 18, 2015 Thanks to others here on Ratsun, I learned that the arm for the gas pedal for an automatic is different than a manual. This explained why the pedals in my car were so close. The PO had done the conversion from an automatic so I found an arm for a manual. My question is - Are the pedals also different or are the mounting holes just in different spots? Quote Link to comment
datzenmike Posted April 18, 2015 Report Share Posted April 18, 2015 Remove the gas pedal from the floor and you will find there are three possible holes so the two hole pedal can be shifted to either side sharing the center hole. 1 Quote Link to comment
INDY510 Posted April 18, 2015 Report Share Posted April 18, 2015 all the gas pedals look the same for 510's and 710's ... probably alot of other datsuns too Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.