hisdudenes Posted April 12, 2015 Author Report Share Posted April 12, 2015 my 72 beast was purchased for 1000$ about a year and a half ago it reads 59000 miles but I imagine its more like 159000. ti am the 4th owner the first owner primarily towed it behind his rv a did the second owner the second owner sold it to his son and when his son was bored of it he bought it back. it drives great and I am very happy to own it. so far I have done basic stuff with it like fresh plugs wires cap & rotor, master cylinder brake cylinders water pump fan belt newish rims and tires and all new water hoses. I just ordered all brand new stering stuff like idler arm, tie rods, center link, end links sway bar & upper/lower control arm bushings. mostly all moog. also picked up kyb gas a just shocks. I plan on repainting everything buying the wildwood disk brake kit front & rear and eventuly doing a ka swap or mebey sr. 1 Quote Link to comment
flatcat19 Posted April 12, 2015 Report Share Posted April 12, 2015 So, where's the truck? I see you learned how to post pics-but isn't this thread for your truck? Again, where's the truck? 1 Quote Link to comment
hisdudenes Posted April 12, 2015 Author Report Share Posted April 12, 2015 what do you mean where is the truck? 1 Quote Link to comment
flatcat19 Posted April 12, 2015 Report Share Posted April 12, 2015 I don't see it. 1 Quote Link to comment
ggzilla Posted April 12, 2015 Report Share Posted April 12, 2015 I see a 521 Nice truck, dudnes! 1 Quote Link to comment
hisdudenes Posted April 12, 2015 Author Report Share Posted April 12, 2015 im not sure it shows up fine for me. you say I learned to post pics but you cant see them 1 Quote Link to comment
flatcat19 Posted April 12, 2015 Report Share Posted April 12, 2015 I see the interior of one. What seats are those? Have any pics of how they're mounted? 1 Quote Link to comment
hisdudenes Posted April 12, 2015 Author Report Share Posted April 12, 2015 im not positive but I was told they came from a prelude. I might be able to get my roommate to take some pics of how there mounted. im out of town 1 Quote Link to comment
flatcat19 Posted April 12, 2015 Report Share Posted April 12, 2015 im not sure it shows up fine for me. you say I learned to post pics but you cant see them Um...it's camouflaged. :poke: 4 Quote Link to comment
ggzilla Posted April 12, 2015 Report Share Posted April 12, 2015 The truck is in the first post. I can see it on my phone. 1 Quote Link to comment
flatcat19 Posted April 12, 2015 Report Share Posted April 12, 2015 The truck is in the first post. I can see it on my phone. Um...it's camouflaged. :poke: 4 Quote Link to comment
maltese Posted April 12, 2015 Report Share Posted April 12, 2015 No one gets my joke Wow. 2 Quote Link to comment
maltese Posted April 12, 2015 Report Share Posted April 12, 2015 Cool truck! Congrats. Quote Link to comment
flatcat19 Posted April 12, 2015 Report Share Posted April 12, 2015 Wow. I'm losing my touch. 2 Quote Link to comment
MicroMachinery Posted April 12, 2015 Report Share Posted April 12, 2015 I don't see it. 2 Quote Link to comment
Dolomite Posted April 12, 2015 Report Share Posted April 12, 2015 Um...it's camouflaged. :poke: Man, Ratsun's been a bit slow on the uptake lately. I had the same though before reading your post. 2 Quote Link to comment
hisdudenes Posted December 2, 2015 Author Report Share Posted December 2, 2015 Ok so its been a bit since ive posted but since pics were taken i have swapped over to ball joint suspension and added new idler arm centerlink and both tie rods brand new. I greased all joints as required yet My 100$ jdm centerlin has busted boots with less than 100 miles bad crater cracks. 2 Quote Link to comment
hisdudenes Posted December 4, 2015 Author Report Share Posted December 4, 2015 I picked up a freshened up l20b for my truck today that didnt come with the flywheel so im working locating a 200mm 6 bolt one but i may end up picking up a 225mm one and find a later 4 speed out of a 620.i would to like to swap to 5 speed but i cant afford to right now.if anybody ha a good flywheel laying around let me know. Quote Link to comment
banzai510(hainz) Posted December 4, 2015 Report Share Posted December 4, 2015 you can use the org 4 speed just use the correct 225mm bearing and the 620 T/O sleeve as its sized for the 225 diaphrame height. I think partsw train had a whole bearing and sleeve( lok under say 76-79 620) ck the part numbers to match 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.