Sapoo Posted September 4, 2016 Report Share Posted September 4, 2016 Clean! So dope. love that yellow 1 Quote Link to comment
JakeWard Posted September 28, 2016 Author Report Share Posted September 28, 2016 If the kingpin kits and seemingly all other bits are no longer available, where do I start on making this truck not handle like a wet noodle? I see folks making new lower arms to run ball-joints, but 800 bucks is a little too hefty for me. Anyone have a direction that isn't forkin- out for those or dropping the frame onto a miata? 1 Quote Link to comment
Charlie69 Posted September 29, 2016 Report Share Posted September 29, 2016 King pin kits are on ebay as are most of the other parts. Quote Link to comment
banzai510(hainz) Posted September 30, 2016 Report Share Posted September 30, 2016 autozone also has Kingpin kits for like 144$ then you need to install them by someone that knows hOw. Mklotz on here has spares and can do a set . key is have the right guy do them. Last guy said he did mine and just mashed them in there. I thought I was going to bust a tierod end. I had someone else do it . and have a spare set now also. put gas shocks on there also. 1 Quote Link to comment
Stoffregen Motorsports Posted September 30, 2016 Report Share Posted September 30, 2016 Swapping to balljoint suspension offers not only balljoints, disc brakes and better steering, but improved suspension geometry as well. I can do the work, and I've done this particular swap before so if you're interested in the swap and don't want to or can't do it yourself, give me a shout. I'm right up the hill from Chico and would love to do another one of these swaps. I even have a 720 clip here at the shop right now. 1 Quote Link to comment
Charlie69 Posted October 1, 2016 Report Share Posted October 1, 2016 Sent you a PM. This truck looks like one Rocket Dog built and sold. Does it have a 520 metal dash top and is it a 1972 with 3 point seat belts? Quote Link to comment
thisismatt Posted October 1, 2016 Report Share Posted October 1, 2016 Sent you a PM. This truck looks like one Rocket Dog built and sold. Does it have a 520 metal dash top and is it a 1972 with 3 point seat belts? Didn't his have a fresh paint job? 1 Quote Link to comment
Charlie69 Posted October 2, 2016 Report Share Posted October 2, 2016 Yes Rocket Dog's had fresh paint, just commenting it is similar. Quote Link to comment
JakeWard Posted October 2, 2016 Author Report Share Posted October 2, 2016 I really don't know the history of this truck. It supposedly sat for 15 years in a shop/garage. No 3-point belts. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.