Urbanassault Posted March 30, 2015 Report Share Posted March 30, 2015 Hey everyone need some help finding wheels that will fit with stock suspension I need something that will fit in the well and can accept being lowered and not interfere to much just installed my 15x8 +0 and they don't fit at all I shreaded the rear wheels not a good sign but they Shute did look good Quote Link to comment
Urbanassault Posted March 30, 2015 Author Report Share Posted March 30, 2015 Ok my bad on the first picture post but you can see the tires and I'm share if I rolled the fenders this would stop being so bad but I'm not to share how to roll the fenders I've watched some videos but still really don't want to try and f it up so if any one has any good ways to do this any help would be awesome, Quote Link to comment
Rakko Posted March 30, 2015 Report Share Posted March 30, 2015 This forum is pretty dead. I don't know about the wheels. 8" seems pretty wide though for a stock wheel that was maybe 5.5. They do look awesome. Where are they rubbing? Quote Link to comment
datzenmike Posted March 30, 2015 Report Share Posted March 30, 2015 Don't ruin the fenders by rolling. Get rims and tires that actually fit the car. If that is 8" wide and 0 offset then you need rims with +4 offset or 6" wide to get the tire moved over under the fender. I've said this a million times. NEVER fall in love with rims and then try to make the car fit them. This is just like marrying your high maintenance model girl friend. She looks great, but YOU have to make all the changes and put up with a total cunt. Marry only within your species and you will be happily married ever after. Your g/f should use gray/silver nail polish to go with what she's wearing, that red is gauche. Quote Link to comment
Dolomite Posted March 30, 2015 Report Share Posted March 30, 2015 I was thinking gaudy. Quote Link to comment
datzenmike Posted March 30, 2015 Report Share Posted March 30, 2015 ... a close second. Quote Link to comment
Urbanassault Posted March 30, 2015 Author Report Share Posted March 30, 2015 Ha ya agreed they do look off I had them on my 200 and got them cheep but no the wheels will be flat black when I get around to getting new wheels probably gonna go with a 15x6 but just got done putting the stock wheels back on and gonna go in tomorrow and have new rubbers put on fenders will stay as is and I'll build the car and put wheels on not change the car to put wheels on thanks for all the feed back Quote Link to comment
datzenmike Posted March 30, 2015 Report Share Posted March 30, 2015 Is there room to positive offset them in? I like the wider tire on the back. Quote Link to comment
Urbanassault Posted March 30, 2015 Author Report Share Posted March 30, 2015 There is with the 8in wheels I had probably close to 3inches before I would hit the strut so I could stay with 8s but we'll keep all the wheels the same size new stock rubber is on the way 9am tomorrow morning just hope the wife remembers how to drive a standard mabie I'll take her out tonight and have her drive in a closed parking lot after the kids go to bed Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.