Apollo77 Posted March 22, 2015 Report Share Posted March 22, 2015 Is there a way to do a swap wothout pulling the window rubbers? 1 Quote Link to comment
TENDRIL Posted March 22, 2015 Report Share Posted March 22, 2015 there is if you dont care how well it looks 1 Quote Link to comment
TENDRIL Posted March 22, 2015 Report Share Posted March 22, 2015 is this on a truck? 1 Quote Link to comment
Apollo77 Posted March 22, 2015 Author Report Share Posted March 22, 2015 Yes and I'd like it to look good 1 Quote Link to comment
TENDRIL Posted March 22, 2015 Report Share Posted March 22, 2015 never done a truck sorry 1 Quote Link to comment
TENDRIL Posted March 22, 2015 Report Share Posted March 22, 2015 but all the other dattos i have seen go under the gasket so yes to do it right pull the rubber 1 Quote Link to comment
Apollo77 Posted March 22, 2015 Author Report Share Posted March 22, 2015 Ok thanks for the input 1 Quote Link to comment
sebpv Posted March 22, 2015 Report Share Posted March 22, 2015 EDIT: wrong thread post 1 Quote Link to comment
red13 Posted March 23, 2015 Report Share Posted March 23, 2015 i am working on a way to make a mold to form cardboard headliners for new ones. once i get it figured out ill let people know. 1 Quote Link to comment
abbylind Posted March 23, 2015 Report Share Posted March 23, 2015 Ive got a tool designed to break the seal on rubber weather stripping to remove windshields. Im wondering if it would work to remove and install the headliner? 1 Quote Link to comment
Apollo77 Posted March 23, 2015 Author Report Share Posted March 23, 2015 I'm thinking of cutting it then when I get the new one made just try to glue/tuck it in. 1 Quote Link to comment
abbylind Posted March 23, 2015 Report Share Posted March 23, 2015 Heres the link for the tool http://www.lmctruck.com/icatalog/cc/865w/0035.jpg 1 Quote Link to comment
red13 Posted March 23, 2015 Report Share Posted March 23, 2015 heres where i got my headliner http://www.ebay.com/itm/620-DATSUN-PICKUP-HEADLINER-1972-1979-NEW-IN-BOX-ALL-PRE-SEWN-READY-TO-INSTALL-/161642351069?pt=Motors_Car_Truck_Parts_Accessories&hash=item25a2a289dd&vxp=mtr 1 Quote Link to comment
sebpv Posted March 24, 2015 Report Share Posted March 24, 2015 Hows the fit Red? And what material did you choose? Quote Link to comment
red13 Posted March 24, 2015 Report Share Posted March 24, 2015 Haven't got to installed it yet. It seems good like the stock material and they send u extra for the visors. I just picked silver grey. Quote Link to comment
JoeCool Posted March 24, 2015 Report Share Posted March 24, 2015 Ive got a tool designed to break the seal on rubber weather stripping to remove windshields. Im wondering if it would work to remove and install the headliner? DAMN! I could have used that last week at the pick and pull. I tried to get a windshield from an 82 720 and cracked it. I was being very careful too! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.