Need Air-Gap Spec For This EI Distributor

[difrangia]

I have the Haynes manual but can't find the air-gap dimension for the non-matchbox dizy that I've just rebuilt. The dizy # is 22100-B9800.  I believe that this is the 49-state dizy. The manual states .008-.016 for California EI dizy. The one running on my original Okie 620 checks .015 or so. This is going in the E1 that I'm re-doing. Here are some pics of the dizy. Thanks.

 

 

 

 

[datzenmike]

This is a remote igniter EI distributor, similar ones were used as early as the '76 model year in the 620. #22100-B9800 was used only in the Fed '78 620s. My '78 FSM states 0.008 to 0.016" air gap.

[difrangia]

This is a remote igniter EI distributor, similar ones were used as early as the '76 model year in the 620. #22100-B9800 was used only in the Fed '78 620s. My '78 FSM states 0.008 to 0.016" air gap.

Thanks, I've set it at .015. On to the next chore. On track for the early-mid May fire-off target.

 

Steve