Jump to content


Photo

JDM to USDM License Plate Adapters


  • Please log in to reply
6 replies to this topic

#1 NYGator

NYGator

Posted 04 March 2015 - 12:00 AM

Hey Everyone. I'm new to Datsun community and I really need a set of JDM to USDM License Plate Adapters for my new project to be street legal without drilling another set of holes.  I did see some ingenious ones posted that can be utilized both JDM and USDM but I am unable to reply to that original posting.  Please let me know if you have a spare set laying around or any other advice.  I would most definitely compensate you for your parts and S&H.  Thank you for your time and I hope someone can hook me up.  I look forward to being an active datsun ratsun member. 



#2 datzenmike

datzenmike
  • Location:Vancouver Island
  • Cars:'74 710 sedan, '76 710. prevoius... '78 620, '71 521, '68 510 new '76 B-210

Posted 04 March 2015 - 05:56 AM

Welcome to Ratsun Mr. Gator.

You are now clear to post. Be sure to do your buying or offer to buy by private message or in the classified section. Our forums are for information and discussion only. Thank-you.
Posted Image

#3 MikeRL411

MikeRL411
  • Location:Rancho Palos Verdes CA
  • Cars:67RL411, 90 240SX, 97J30T

Posted 04 March 2015 - 09:10 AM

 

Hey Everyone. I'm new to Datsun community and I really need a set of JDM to USDM License Plate Adapters for my new project to be street legal without drilling another set of holes.  I did see some ingenious ones posted that can be utilized both JDM and USDM but I am unable to reply to that original posting.  Please let me know if you have a spare set laying around or any other advice.  I would most definitely compensate you for your parts and S&H.  Thank you for your time and I hope someone can hook me up.  I look forward to being an active datsun ratsun member.

 
I just punched 2 holes inboard of the US spaced holed and bolted my plates up to the JDM attach points. Assuming you do not want to put JDM plates on a US market vehicle.

#4 INDY510

INDY510

Posted 04 March 2015 - 09:42 AM

I believe this is what you're looking for: http://community.rat...plate-adaptors/

#5 NYGator

NYGator

Posted 04 March 2015 - 11:39 AM

Thanks Mike. Right, I don't want to punch holes in my US plates. Yes INDY those are the adapters....they'd really help and I don't know how to get a hold of a set....checked the classifieds none are listed and that is an old thread that's locked.  Any ideas?



#6 INDY510

INDY510

Posted 04 March 2015 - 12:21 PM

try sending a message to Derux: http://community.rat...user/428-derux/

#7 NYGator

NYGator

Posted 04 March 2015 - 12:24 PM

OK. Thanks I just did. I hope he has a spare set laying around....fingers crossed   :crying: