drowning in broken cars Posted February 10, 2015 Report Share Posted February 10, 2015 Hello all, before I made a classified add I wanted to gauge interest in any chipped/socketed ka or sr ecus for those with swapped cars or 240s. Also wanted to post here first as I wasnt sure if anyone else is doing this kind of thing on here as I dont want to step on anyones toes. Just generally wanted to throw it out there and see what people think. 1 Quote Link to comment
Draker Posted February 10, 2015 Report Share Posted February 10, 2015 I haven't seen anyone on here doing this work. I think most people generally go to 240 forums for extensive knowledge on those engines and upgrades. I could be wrong.. 1 Quote Link to comment
Charlie69 Posted February 11, 2015 Report Share Posted February 11, 2015 Need more info and pictures please. Explain what you have and what you can do. Quote Link to comment
Laecaon Posted February 11, 2015 Report Share Posted February 11, 2015 The topic has barely been mentioned on this board, and because of that I dont know how many even know what it does. I need to socket my CA ECU, so I can properly use a KA MAF and control the intake butterfly valves with a non stock setup. Eventually I just want NisTune though. 1 Quote Link to comment
Lockleaf Posted February 12, 2015 Report Share Posted February 12, 2015 Are you planning on offering a service to socket ecus? And then I assume you are getting a chip burner? But really sure what you gauging interest in. 1 Quote Link to comment
Draker Posted February 12, 2015 Report Share Posted February 12, 2015 Probably just Socketing the ECU.. not burning chips. 1 Quote Link to comment
Charlie69 Posted February 13, 2015 Report Share Posted February 13, 2015 I am still curious to see pictures off his work. No pictures = it did not happen! Quote Link to comment
drowning in broken cars Posted February 23, 2015 Author Report Share Posted February 23, 2015 Yes, removing stock uv reflash eprom, soldering in 28 pin zif socket and reburnable chip. basemapping. yes I have a chip burner, have chipped hondas, nissans, etc. 1 Quote Link to comment
drowning in broken cars Posted February 23, 2015 Author Report Share Posted February 23, 2015 Or in cases of dohc ecu/sr soldering in 20x2 header to accept daughterboard etc 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.