HKS Posted February 8, 2015 Report Share Posted February 8, 2015 Looking to hide the cable though the underside of the fender and found the factory 510 release and cable to be approx 12 inches short. Can anyone tell me if the 620 unit is longer in length? Basically looking for a pull type that is the same style as the 510. Thanks in advance. Quote Link to comment
datzenmike Posted February 8, 2015 Report Share Posted February 8, 2015 The 620 is also routed about the same as the 510 along the left inner fender and rad support, so I would say they are about the same length. Quote Link to comment
john510 Posted February 8, 2015 Report Share Posted February 8, 2015 For a 510 ? the stock cable runs through the inner fender well,maybe you have the wrong cable ? Quote Link to comment
HKS Posted February 8, 2015 Author Report Share Posted February 8, 2015 Running the cable under the fender between the wheel well. Trying to clean up the engine bay and keeping the cable out of sight. Any thoughts on a unit that might be a bit longer than factory? Quote Link to comment
Mattndew76 Posted February 21, 2015 Report Share Posted February 21, 2015 Couldn't you head to a bike shop and have a custom pull cable made to your specs? Quote Link to comment
HKS Posted March 7, 2015 Author Report Share Posted March 7, 2015 ended up with a bike cable and got it to work, although the plastic shielding was a alot smaller in diameter than the oem. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.