spook420 Posted February 4, 2015 Report Share Posted February 4, 2015 Wondering if anyone can verify that is the correct read out and which part I would need to get to to fix it. I use a Memo Scanner U480 for the reader. Ive been looking for the part but not sure which one it is. Code: P1444 Canister Purge Volume Control Valve Circuit Malfunction Possible Causes: EVAP control system pressure sensor is damaged or has failed EVAP purge volume control valve is stuck open EVAP canister vent control valve is damaged or has failed EVAP canister is damaged, or hoses are connected incorrectly Quote Link to comment
Lockleaf Posted February 12, 2015 Report Share Posted February 12, 2015 It could be bad hoses or a damaged carbon canister in your evaporative emissions system. The purge solenoid could be bad. The evap pressure sensor could be bad. Quote Link to comment
gene knight Posted June 26, 2015 Report Share Posted June 26, 2015 does the 2012 frontier 4.0 have these same problems Quote Link to comment
Lockleaf Posted June 26, 2015 Report Share Posted June 26, 2015 It could. Every obd2 car has the evap emissions system, so it can throw that same code Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.