riderosa Posted January 19, 2015 Report Share Posted January 19, 2015 Currently I have bolts for attaching the 40DCOE carbs to the intake manifold. In order to add the soft mount kit I need studs. Does anyone know the stud size(8 mm?) , pitch, and length? Rich Quote Link to comment
riderosa Posted January 20, 2015 Author Report Share Posted January 20, 2015 Problem solved Quote Link to comment
Stoffregen Motorsports Posted January 20, 2015 Report Share Posted January 20, 2015 Those are not the soft mounts I was talking about. The Nismo soft mounts completely isolate the carbs from the intake manifold by a vucanized rubber mount with studs on both sides of the mount. It is a far better setup than the white plastic o-ring style soft mounts. The Nismo mounts come in offset and non-offset configurations. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.