N268510S Posted December 2, 2014 Report Share Posted December 2, 2014 Hello Everyone, I need some help in locating a four way brass brake fluid distribution valve. If anyone has one laying around please e-mail me at fijikhan66@yahoo.com. Thx Quote Link to comment
moath Posted March 8, 2015 Report Share Posted March 8, 2015 Are you running a single output master or something? I think it'd be safer to keep a separate front and rear system. Quote Link to comment
Z-train Posted March 8, 2015 Report Share Posted March 8, 2015 What are you trying to do? Quote Link to comment
datzenmike Posted March 8, 2015 Report Share Posted March 8, 2015 If the thing you are looking for looks like this and has an electrical wire on it... do NOT replace with a 4 way block. This is your brake pressure failure warning valve. It lets you know there has been a hydraulic failure in either the front or the rear system. Yes, TENDRIL has it exactly. This is a pressure differential switch. It keeps the front and rear hydraulic systems separate yet senses when there is a failure and turns the red brake light on in the dash. Quote Link to comment
TENDRIL Posted March 8, 2015 Report Share Posted March 8, 2015 at least i think that is what hes talking about. all i am going of of is his car in profile Quote Link to comment
datzenmike Posted March 8, 2015 Report Share Posted March 8, 2015 Most 510 owners think it's the 'proportioning' valve. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.