jrock4224 Posted March 22, 2016 Author Report Share Posted March 22, 2016 datsunmike you were supposed to move this project datto a14 dog leg ready to go in need to build some adapters for the mounts ... australia has not come through wing fits like shit .... and one front lip is like foreign for aint gonna fit shit 1 Quote Link to comment
jrock4224 Posted March 22, 2016 Author Report Share Posted March 22, 2016 huge thanks to b210 gx mike for the hook up ... i owe u a huge hug an beer ... my 210 suspension for the yellow 1200 that will get a vinyl top ... Datzen mike will you please move this to project datto 3 Quote Link to comment
Lockleaf Posted March 23, 2016 Report Share Posted March 23, 2016 Maybe shoot DM a PM? Or maybe 3rd time is a charm... That engine looks great. Quote Link to comment
jrock4224 Posted March 23, 2016 Author Report Share Posted March 23, 2016 lol i did and he rick ratted me and said it was done ... Quote Link to comment
hobospyder Posted March 23, 2016 Report Share Posted March 23, 2016 rotate wing clockwise from that picture and see if it fits better? also, first three pictures are the same and had me thinking the pipe dog was a cat and that it was moving..... i think i need to go to sleep Quote Link to comment
bananahamuck Posted March 23, 2016 Report Share Posted March 23, 2016 It doesn't ,, it must be a cut to fit type of a thing. It did look to have a ton of meat to play with though rotate wing clockwise from that picture and see if it fits better? 1 Quote Link to comment
datsunfreak Posted March 23, 2016 Report Share Posted March 23, 2016 australia has not come through wing fits like shit .... It doesn't ,, it must be a cut to fit type of a thing. It did look to have a ton of meat to play with though Check my build thread. Lift trunk up 2-3". Bolt spoiler to trunk. Files corners (GO SLOW!) until the trunk will close. Took me about an hour. Quote Link to comment
jrock4224 Posted March 23, 2016 Author Report Share Posted March 23, 2016 this was the other two pics i suppose i coul learn to copy and paste better lol hobo .. theres two pipe dogs now 6 Quote Link to comment
]2eDeYe Posted March 23, 2016 Report Share Posted March 23, 2016 datsunmike you were supposed to move this project datto Moved to project datto :lol: 2 Quote Link to comment
datsunfreak Posted March 24, 2016 Report Share Posted March 24, 2016 huge thanks to b210 gx mike for the hook up ... i owe u a huge hug an beer ... my 210 suspension for the yellow 1200 that will get a vinyl top ... Do you still need the ones I have? Quote Link to comment
Eagle_Adam Posted March 28, 2016 Report Share Posted March 28, 2016 Seems to be missing pics........ Hmmmmm Quote Link to comment
jrock4224 Posted March 28, 2016 Author Report Share Posted March 28, 2016 custom degreed lowering blocks installed had to farm some adapters to the motor mounts ... kinda not like the wiki describes it but close ... tranny needs to be moved over a little for clearance ... almost got talked into dragging my yellow 1200 in and working on it ... decided against taking up another stall ... need to get my burb lifted machinining the mounting surface of the rear appliances to try and get them under the fender better 5 Quote Link to comment
q-tip Posted March 29, 2016 Report Share Posted March 29, 2016 Too bad I can't use the machines at work I could whip those out in no time. Car is looking good man! 1 Quote Link to comment
datsunfreak Posted March 29, 2016 Report Share Posted March 29, 2016 Listen up, because I don't say this too often, but that might be too low... :rofl: custom degreed lowering blocks installed Quote Link to comment
q-tip Posted March 29, 2016 Report Share Posted March 29, 2016 Listen up, because I don't say this too often, but that might be too low... :rofl: Have you seen any of his other rigs....an I mean any.....well other than the suburban he plans on lifting.... Quote Link to comment
datsunfreak Posted March 30, 2016 Report Share Posted March 30, 2016 Have you seen any of his other rigs....an I mean any.....well other than the suburban he plans on lifting.... Good point... Quote Link to comment
Icehouse Posted March 30, 2016 Report Share Posted March 30, 2016 I know where to get really small tires :) Quote Link to comment
Bory Posted March 30, 2016 Report Share Posted March 30, 2016 Do they come out of a rattle can? Quote Link to comment
jrock4224 Posted March 30, 2016 Author Report Share Posted March 30, 2016 I know where to get really small tires :) ordered 12 already ... lol 155 55 14 1 Quote Link to comment
datsunfreak Posted March 31, 2016 Report Share Posted March 31, 2016 ordered 12 already ... lol 155 55 14 Those are small... ^_^ But a great size for a slammed 1200. I have 165/55s on mine and they fit it well... Quote Link to comment
datsunfreak Posted April 5, 2016 Report Share Posted April 5, 2016 I don't think that's gonna steer very well... :rofl: 5 Quote Link to comment
jrock4224 Posted April 5, 2016 Author Report Share Posted April 5, 2016 drive my truck ... lol it would ride perfect and steer awesome if it weren't for the body hanging so low ... while it rides great the inner fenders are showing some ill effects .. tires look great for rubbing sheet metal often .. i will raise it once i can see through the cab and smell the tire 3 Quote Link to comment
q-tip Posted April 5, 2016 Report Share Posted April 5, 2016 Makes me miss my appliance meshies 2 Quote Link to comment
Coda Posted April 5, 2016 Report Share Posted April 5, 2016 OMG. That stance is pure sex. Turning is over-rated B) 5 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.