Scgreen620 Posted August 27, 2014 Report Share Posted August 27, 2014 Has anyone here removed them from their truck before ? I tried pulling mine off but I was afraid of breaking the tabs and or the mdf panels .... Pics samples ? Thanks Quote Link to comment
orangie Posted August 27, 2014 Report Share Posted August 27, 2014 I have a flat piece of steel with a groove in the center that I use, but depending on where you car is from some of those pins will break. Metal lasts forever out here, but plastic gets destroyed. Quote Link to comment
Scgreen620 Posted August 28, 2014 Author Report Share Posted August 28, 2014 I'm from California did you make this putty knife/ pry bar? Quote Link to comment
5t341tH Posted August 28, 2014 Report Share Posted August 28, 2014 go buy a interior trim pry bar set. Harbor freight has it for cheap Quote Link to comment
orangie Posted August 28, 2014 Report Share Posted August 28, 2014 Mines was a tool for something else that I modified. It's about 16 gauge steel, but I don't remember what the tool was really for. Quote Link to comment
Scgreen620 Posted August 28, 2014 Author Report Share Posted August 28, 2014 Nice ... Thanks for the info... Quote Link to comment
red13 Posted August 29, 2014 Report Share Posted August 29, 2014 http://www.ebay.com/itm/DATSUN-PL510-PL620-260Z-PL521-Car-Door-Trim-Panel-Molding-Clip-Retainer-Pry-Tool-/311070740702?hash=item486d42d0de&item=311070740702&pt=Motors_Automotive_Tools&vxp=mtr Quote Link to comment
Scgreen620 Posted August 30, 2014 Author Report Share Posted August 30, 2014 That has everything! Thanks Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.