Jump to content

well the kids are grown up so


Recommended Posts

got more goodness today and have questions 

IMG_20140811_182404_506_zpsirxhdjsq.jpg

looks naked 

IMG_20140811_182912_226_zpsyf4ezgw8.jpg

looks better 

IMG_20140811_182938_627_zpsbujylcyt.jpg

the question is it comes with double sided sticky tape all the way around and 2 embeded nuts but no bolts to mount it 

will the sticky tape hold it on its own or should I drill 2 holes and buy bolts 

anyone with experience with these spoilers or others please let me know 

  • Like 1
Link to comment
  • Replies 55
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

The ones I have installed on a different brand car require you to drill and install bolts to go with the double sided tape. They usually have a template you tape to the car for hole location. Check the box for yours or it might be part of a PDF for installation instructions.

I always hate drilling for these, but the bolts are necessary.

Link to comment

The ones I have installed on a different brand car require you to drill and install bolts to go with the double sided tape. They usually have a template you tape to the car for hole location. Check the box for yours or it might be part of a PDF for installation instructions.

I always hate drilling for these, but the bolts are necessary.

thanks I hate drilling too but thought it was probably necessary 

Link to comment
  • 4 weeks later...

<p>Well today was the day for clear reflectors to be installed the drivers side was easy I removed the inner fender and pulled the amber one in about 15 mins the passenger side was another story I removed the inner fender and there was the windshield washer bottle right in the way the bottom screw was easy the top one you needed to be double jointed but I got it out<br />

installed the spoiler and it was pretty easy but always scary drilling holes<br />

I didn't realize but the trunk lid is plastic or fiberglass I had to oblong the holes because they don't go straight through the trunk the have to be angled because the bolts were holding the back of the spoiler off of the trunk lid</p>

<p><br />

IMG_20140906_151800_787_zpsc3gcgucn.jpg</p>

<p>IMG_20140906_151815_181_zpsmriw2xmf.jpg</p>

<p>IMG_20140906_151853_217_zps0lvu0xxa.jpg</p>

<p>getting detailed</p>

<p>IMG_20140906_163748_342_zpsaxqv6xte.jpg</p>

<p>IMG_20140906_193229_862_zps49jgte6b.jpg</p>

<p>IMG_20140906_193246_979_zpsswhpzq23.jpg</p>

<p>IMG_20140906_193257_473_zpskubucnmz.jpg</p>

<p>IMG_20140906_193350_892_zpsvukr2jin.jpg</p>

<p> </p>

Link to comment

went for a drive today Jackie wanted to head for the sea so we went by two jobs I did in the mill valley area a couple years ago thenup to the top of the hill where you can see Sammy Hagars house  to the base of the golden gate then to Marin Joes for dinner then to the top of Mt Tamalpias got there right at sunset 

the pics dont do the sunset justice it was glowijng orange above the fog which was just above the car 

the pics of the sunset only came out decent when I focused above the fog line 

safeway for a restroom stop 

SAM_1513_zpsde4dd24e.jpg

SAM_1516_zps93678dfe.jpg

the view from near Sammys house 

SAM_1519_zps3c5b63ed.jpg

SAM_1520_zpsf926da15.jpg

highway 101 at the base of the pic and San Francisco near the top 

SAM_1521_zps0e9fc10e.jpg

saw an old car on the trip

 

SAM_1525_zps6d388ad1.jpg

SAM_1543_zps8e09bf4b.jpg

SAM_1540_zps2a439805.jpg

SAM_1541_zps33fbfda7.jpg

 

  • Like 3
Link to comment

and a few more 

SAM_1611_zps8834af1f.jpg

this was coming up on the other side, sunset and moon rise at the same time 

SAM_1612_zpsb797ae04.jpg

fishing boats on full zoom , they looked like boueys or surfers from where we were 

SAM_1613_zpsdfed8307.jpg

SAM_1614_zps53675182.jpg

the van owner

SAM_1615_zpsbbaa7d5f.jpg

  • Like 2
Link to comment

You should send me those wheels. :cool:

they have some curb rash from previous owner you wouldn't want them 

actually it is light but annoying that people cant drive well enough to avoid curbs when installing nice wheels 

  • Like 1
Link to comment

:o 

 

I'm insulted you came into my yard and didn't say hello.......

 

 

 

 

 

 

........or even piss on my door........

 

 

 

 

 

...............not even a fart in my general direction.......

 

 

 

 

 

 

:fu: 

 

 

 

 

 

 

 

 

 

 

 

......at least you took oics this time :lol:  :lol:

  • Like 1
Link to comment

:o

 

I'm insulted you came into my yard and didn't say hello.......

 

 

 

 

 

 

........or even piss on my door........

 

 

 

 

 

...............not even a fart in my general direction.......

 

 

 

 

 

 

:fu:

 

 

 

 

 

 

 

 

 

 

 

......at least you took oics this time :lol:  :lol:

feel kindof bad about that but it was a 1pm start and a mad dash after dinner to the top 

but if I knew if you bought a new camera I would have called you  :devil:  :devil:  :devil:  :devil:  :devil:

 

 

 

 

just kidding 

sorry we didnt call 

yes lots of oics

  • Like 1
Link to comment

All good.....I'm just bustin' balls.....

 

......but ya.....I probably would've rolled up there with ya.....

 

 

No new camera yet......don't have a lot of money and I wanna get the best deal I can.....research is ongoing......

.........TBA.........

Link to comment
  • 5 months later...

we had a squeak that was getting a little more annoying every day, I thought it was something in the frame or chassis part of the car but it turned out to be a bad rear wheel bearing 

it didnt sound at all like a wheel bearing but the drivers side rocks about 5/15 of an inch and squeaks the exact sound we were hearing 

while I was under the car checking every bolt I found this and was shocked

 

can you tell what it is from the pic ?

 IMG_20150228_195418682_zpshna2cy6s.jpg

  • Like 1
Link to comment

Those are common in performance applications. Driveshafts are also designed to sheer off if overloaded. They are a thin hollow tube and will usually have something like a piece of cardboard inside to dampen vibrations. 

Link to comment

I could just see it now go nto do a burnout and hook up to good and good bye driveshaft 

they are probably much stronger than that 

but I was very surprised 

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.