Leebert2176 Posted July 21, 2014 Report Share Posted July 21, 2014 I just removed my stock am/fm clarion radio from my 210, and installed a pioneer. It turns on with the ignition, plays music etc. . . however when I turn the car off, all the things I preset disappear. the original six input wiring harness has six wires: Black (ground), blue (acc......?), green white (?), white green (?), white and white black (speakers) does anyone know what these six wires actually are, so I can wire this thing correctly? Thanks. Quote Link to comment
spottedog Posted July 21, 2014 Report Share Posted July 21, 2014 The yellow wire supply's a constant 12 volts to power the internal memory (all your presets) The yellow wire goes to the vehicles battery plus side. Yellow 12V Constant / MemoryRed Switch / AccessoryBlack GroundBlue Antenna RemoteBlue with White Stripe Amplifier Remote Turn-onOrange with White Stripe Dash Light Dimmer/IlluminationGreen Left Rear Speaker (+)Green with Black Stripe Left Rear Speaker (-)White Left Front Speaker (+)White with Black Stripe Left Front Speaker (-)Purple Right Rear Speaker (+)Purple with Black Stripe Right Rear Speaker (-)Gray Right Front Speaker (+)Gray with Black Stripe Right Front Speaker (-) 2 Quote Link to comment
flatcat19 Posted July 21, 2014 Report Share Posted July 21, 2014 The yellow wire supply's a constant 12 volts to power the internal memory (all your presets) The yellow wire goes to the vehicles battery plus side. Yellow 12V Constant / Memory Red Switch / Accessory Black Ground Blue Antenna Remote Blue with White Stripe Amplifier Remote Turn-on Orange with White Stripe Dash Light Dimmer/Illumination Green Left Rear Speaker (+) Green with Black Stripe Left Rear Speaker (-) White Left Front Speaker (+) White with Black Stripe Left Front Speaker (-) Purple Right Rear Speaker (+) Purple with Black Stripe Right Rear Speaker (-) Gray Right Front Speaker (+) Gray with Black Stripe Right Front Speaker (-) Good post. 1 Quote Link to comment
Leebert2176 Posted July 23, 2014 Author Report Share Posted July 23, 2014 Ha ha ha, just re read my post. Sorry I wasn't clear. I knew what the wires on the pioneer were, just not the Dats. . . BUT I figured it out, installed the yellow wire to the (+) on the cigarette lighter. Thanks! ! ! 666 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.