sebpv Posted March 13, 2017 Report Share Posted March 13, 2017 thailand rubber kit i bought a while back Quote Link to comment
ddrum Posted March 13, 2017 Report Share Posted March 13, 2017 I restored the 240z steering wheel i got for it! Istarted with this.... and this Cleaned the years of grime with soapy water and a scotch pad It looked so dull after it dried but i had faith... sprayed some Var polyurethane clear, and color came back! Then primed the black spokes then some black and finished product! although it still has a lot of imperfections it looks way better! I still need to restore the horn pad, but that'll be later! 2 Quote Link to comment
ddrum Posted March 13, 2017 Report Share Posted March 13, 2017 Finally in the cockpit! Man, it looks and feels nice! 2 Quote Link to comment
hobospyder Posted March 13, 2017 Report Share Posted March 13, 2017 are you laying down in that last picture? Quote Link to comment
hobospyder Posted March 13, 2017 Report Share Posted March 13, 2017 looks nice, i suggest a few less keys on that keyring so you aren't putting too much stress on your ignition switch though. i've had one go bad in one of my other cars and don't like risking it anymore Quote Link to comment
ddrum Posted March 14, 2017 Report Share Posted March 14, 2017 I am laying down, it was the selfie camera since my rear cell phone camera sucks. And cool, i'll look into having less keys for sure! thanks! :thumbup: Quote Link to comment
hobospyder Posted March 15, 2017 Report Share Posted March 15, 2017 Ah, I've had a phone I had to do that with. That sucks dude, time for a new phone, but first, datsun parts Quote Link to comment
Farmer Posted March 15, 2017 Report Share Posted March 15, 2017 Finally in the cockpit! Man, it looks and feels nice! Want one!. Looks awesome 1 Quote Link to comment
ddrum Posted March 15, 2017 Report Share Posted March 15, 2017 Thank you so much!! B) Quote Link to comment
willz Posted March 15, 2017 Report Share Posted March 15, 2017 Purchased linkage and spring kit for my single 45dcoe through pierce, purchased Datsundave's rfid push button start kit, and found the innovative wideband 02 kit on jegs for $45 cheaper than summit Quote Link to comment
78minitruck620 Posted March 19, 2017 Report Share Posted March 19, 2017 i started mock up my gauge cluster, when I got the truck the gauge cluster was just trashed beyond repair. going to use after market gauges and an aluminum panel Quote Link to comment
Jersey Posted March 19, 2017 Report Share Posted March 19, 2017 Installed some new u joints on mine. And helped my brother put a clutch in his 620. Quote Link to comment
NoMoneyZ Posted March 20, 2017 Report Share Posted March 20, 2017 New shocks all the way around on Saturday. There's a rebate on KYB shocks so I bought a set of 4 and I'll get $40 bucks back. 2 Quote Link to comment
CrazedPirate Posted March 21, 2017 Report Share Posted March 21, 2017 Figuring out under all the grime theres a L20 in the 74' 620 I just scored Quote Link to comment
datzenmike Posted March 22, 2017 Report Share Posted March 22, 2017 Yes the L16, L18 and L20B were all 620 engines and totally interchangeable. Lots of thing can be swapped to keep these great trucks on the road in 40 years. Yes it is an L20B. The L20 was a six cylinder previously and when the 4 cylinder came about there had to be a way of telling them apart other than visually. Quote Link to comment
willz Posted March 22, 2017 Report Share Posted March 22, 2017 They made a 2 liter 6 cylinder? I thought it was just the L28. Weird. Time to do some reading Quote Link to comment
Jersey Posted April 23, 2017 Report Share Posted April 23, 2017 Installed my 280 cam and dropped a new distributor in it. The power band is from 2000-6000 rpm: It really pulls hard. It was fast and fun to drive before: But I really had fun on the 58 between Tehachapi and Bakersfield yesterday! Quote Link to comment
Rick-rat Posted April 28, 2017 Report Share Posted April 28, 2017 Got my sway bar installed today, I'm getting to old for this crap. 20 minute job for most, took me 11/2 hours but finally got it done. Not going to let that truck kick my butt :rofl: Quote Link to comment
JesseR Posted April 29, 2017 Report Share Posted April 29, 2017 ordered a new radiator, water pump and fan clutch Quote Link to comment
ratsun.818 Posted August 3, 2017 Report Share Posted August 3, 2017 Old thread but I changed my fuel pump after getting stranded while cashing my check at walmart. haha Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.