Johnlorio Posted July 6, 2014 Report Share Posted July 6, 2014 I'm thinking of lowering my SSS sedan. AZhitman suggested roadster springs up front which is nice as I have a pair on hand. I also have set of roadster rear springs. Any thoughts if they would fit? Would they lower car to match front? Quote Link to comment
graveltrapp Posted July 15, 2014 Report Share Posted July 15, 2014 I think you could get as good as results by rearranging your spring pack. Already in place and guaranteed to fit. Blocks? Quote Link to comment
Johnlorio Posted July 30, 2014 Author Report Share Posted July 30, 2014 Just put in 2" lowering blocks, I think they will stiffen the spring also due to a bigger spring pad. Car looks really low to me now, but I'll let it sit until I install the engine and see how it looks then. Upon inspection it looks to me that the Roadster springs would fit, the only obvious dimensional difference is in the front eye, which is much larger on the 411. The Roadster springs are stiffer and would perhaps change the shackle angle as they don't appear to have as much arch as the 411 springs. I may try them if I don't like the blocks. Thanks! John Quote Link to comment
411gerardo Posted August 14, 2014 Report Share Posted August 14, 2014 Do you have a picture of you setup? Quote Link to comment
Johnlorio Posted August 15, 2014 Author Report Share Posted August 15, 2014 Will try to post one when I get home John Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.