Jump to content

Putting a 78 B210 63A transmission in my 80 210, Questons?


jeremyd72

Recommended Posts

I am in the middle of putting a 63A dogleg 5 speed out of a 78 B210 into my 80 210. It didn't come with the clutch release lever and spring, the throwout bearing collar and spring, or the speedo pinion and I thought mine from the 60 5speed would swap but they wont. Can anyone tell me if these parts from another Datsun will work? I am not having any luck locating these.

 

Thanks,

Jeremy

Link to comment
  • Replies 5
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

The small spring or clip that sits in the clutch arm and holds onto the pivot ball is found on the PL510, PL521 610, all 620s, 710, 720, 810/Maxima, S10 and A10 . 30534-21000

 

The release bearing for the 80 210 is the same as for the B210 dogleg and is also used on all 71B 4 and 5 speeds

 

Speedo sleeve is the big plug that holds the plastic pinion gear. Good news is that the sleeve is used on the PL510, 521, early 620, 610, 710, S10, A10. Find out how many teeth are on the pinion and you can buy the correct one for the dogleg.

 

 

About the clutch arm. The release collar may be unique to the smaller clutch disc (release bearing is common and easy) and the arm fingers that hold it may also be different. The clutch arm part number is unique to the B210 and there is no other arm that will swap by numbers. Now it may be that the clutch arm from a 200sx or any F4W63 4 speed will also work and it's only the collar that is different. .

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.