meatmuffin Posted June 8, 2014 Report Share Posted June 8, 2014 I need to get the hardware/bushings to replace the mounts on my 620. I found the bushings but am still looking for washers/bolts. I could wing it but I'd rather have the right parts. Quote Link to comment
ggzilla Posted June 8, 2014 Report Share Posted June 8, 2014 To get the right parts, take the old ones to the auto parts store. They are M10 metric. The store will match the style and length up for you. Quote Link to comment
Charlie69 Posted July 15, 2014 Report Share Posted July 15, 2014 Most the factory cab bolts are shoulder bolts. This keeps people from over tightening and smashing the bushings. Get some samples of the original bolts and buy bolts the same length and shank diameter and have a machine shop turn down and rethred the ends to match originals. use large fender washers. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.