djpapo Posted April 24, 2014 Report Share Posted April 24, 2014 ok i have brake lights n headlights but no dash board lights no side marker lights and no tail lights for night time please help i should say my truck was parked for 7 years n finally got it running but now my problem is i can't drive it at night please help me ratsun family thank you :crying: Quote Link to comment
DatMo Posted April 24, 2014 Report Share Posted April 24, 2014 Check fuses first and there's often corrosion so just remove all the wires one by one and clean em then return to the same spot. Check the light ignition switch and make sure all wires are intact. Quote Link to comment
Aibast Posted April 24, 2014 Report Share Posted April 24, 2014 Check the fuses, I think the missing electrical stuff was all under one fuse. I'm not 100% sure. But the truck did have 2 main fuses - one for lights and so on other went to all other electical stuff devided trough additional 4 fuses. Quote Link to comment
Rhapakatui Posted April 24, 2014 Report Share Posted April 24, 2014 Like they said, what you're missing is all on the same circuit. I had the same problem in my goon not too long ago. Go ahead and replace the fuses. Old fuses don't seem to work that great anyways. While you're in there, clean the connections in the fuse box. If that doesn't fix it. Get a multimeter and check the wires coming off of the back of your light switch. The one you're looking for splits and runs one way to the parking lights, and the other to the dash lights. Check those connections. Mine was burnt there because a PO had put 30 amp fuses in the fuse box which fried the wires instead of the fuses. If you still have problems, just keep checking that circuit with a multimeter until you find where the power stops. I hate wires with a great passion, but so far, I've been able to address pretty much all of my wiring woes this way. Quote Link to comment
datzenmike Posted April 24, 2014 Report Share Posted April 24, 2014 The 620 fuse box is easily unplugged and unscrewed from under the bottom of the dash. Take it an submerge in a container of ordinary vinegar over night. This will remove copper corrosion. Wash thoroughly in the morning, dry it and install with NEW fuses. Don't trust a fuse get NEW ones. This will probably fix 2 or 3 other electrical problems you haven't found yet. Quote Link to comment
djpapo Posted April 29, 2014 Author Report Share Posted April 29, 2014 ok sorry i didn't get back at u guys till know n thank u guys for answering back i went on n check all my fusses but replaced them anyways i took off the fuse box n clean it with a metal brush till it was nice n shiny double check every wired n put the fuse box back put new fuses in n yesssss my lights all work n finally after 7 long years in my dad's garage my baby is out n running the san francisco streets n thanks to all my ratsun family for ur post n answers i've been able to save a lot of money n fixing little problems like cleaning a fuse box i can almost cry right now i never thought my truck would run the city streets ever again but i did lol is not 100% where i want it to be but with the ratsun family help i know i will get there now is just a matter of $$$$ hahaha thank u guys once again by the way i sold my 90 honda accord to get my truck register n running best decision everrrrrrr lmao :thumbup: 1 Quote Link to comment
MikeRL411 Posted April 29, 2014 Report Share Posted April 29, 2014 Punctuation? Quote Link to comment
hobospyder Posted April 29, 2014 Report Share Posted April 29, 2014 Not allowed, it's the internet Quote Link to comment
datzenmike Posted April 30, 2014 Report Share Posted April 30, 2014 Punctuation? If asking for help... yes. When thanking someone it's fine. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.