BadWagon Posted April 23, 2014 Report Share Posted April 23, 2014 yes... ive tried searching... read countless threads, still have an easy question 71 510 wagon... SR20/5sp is there a driveshaft that will bolt up or am I getting one shortened or made? my wagon didnt come with a shaft so I dont have one to try. thx in advance Quote Link to comment
ggzilla Posted April 23, 2014 Report Share Posted April 23, 2014 Get it shortened. The factory 510 fits IF you installed a (non-SR) short tail transmission. Otherwise gotta go custom Quote Link to comment
BadWagon Posted April 23, 2014 Author Report Share Posted April 23, 2014 Much THX! Quote Link to comment
KyushaKai Posted April 29, 2014 Report Share Posted April 29, 2014 Get it shortened. The factory 510 fits IF you installed a (non-SR) short tail transmission. Otherwise gotta go custom ??? I heard from multiple people that when using 510/620 engine mounts on a flipped x-member, the 2 door/4 door drive shafts will bolt in. edittttt: 2 door/4 door drive shaft on a wagon. Just wanted to clear that up. Quote Link to comment
datzenmike Posted April 29, 2014 Report Share Posted April 29, 2014 If installing a 71B 4 or 5 speed, which are 31.5" long, in a wagon... you can use any sedan stock length driveshaft. It's within about one inch of the correct length. Pretty sure an SR 5 or 6 speed is longer than 31.5". Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.