BlackBird620 Posted April 10, 2014 Report Share Posted April 10, 2014 What problems would I note than likely run into if I swapped my center link to my outer tie rod location on my idler and steering box arm? And yes I know it will need an alignment once I do anything steering related. Quote Link to comment
ggzilla Posted April 10, 2014 Report Share Posted April 10, 2014 Huge bump steer. The tie rods are the same length as the control arms to minimize bump steer. If you somehow put the center link where the tie rod goes, it will be bad. Just going down the road it won't track straight. 1 Quote Link to comment
BlackBird620 Posted April 10, 2014 Author Report Share Posted April 10, 2014 I meant swap locations on the arm not use it as a tie rod Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.