Icehouse Posted April 1, 2014 Report Share Posted April 1, 2014 THere used to be a dude on here that would re chrome bumpers for a really good price. Does anyone have his contact info? He was out of California if that helps. Quote Link to comment
mrbigtanker Posted April 1, 2014 Report Share Posted April 1, 2014 Universal metal plating 1526 West 1st street Azusa ,Ca 1-626-969-7932 They are about 200-300 for rechrome. Quote Link to comment
Laecaon Posted April 1, 2014 Report Share Posted April 1, 2014 There are horror stories of Shagy and his Chrome plating around. 1 Quote Link to comment
RTB Posted April 1, 2014 Report Share Posted April 1, 2014 I have a really good guy here in kc. 300 a bumper. Quote Link to comment
mrbigtanker Posted April 2, 2014 Report Share Posted April 2, 2014 Universal metal plating 1526 West 1st street Azusa ,Ca 1-626-969-7932 They are about 200-300 for rechrome. This is not shaggy by the way. Quote Link to comment
67_1600 Posted April 2, 2014 Report Share Posted April 2, 2014 I got a few Roadster bumpers and overriders done by Big D's down in California. They're one of the companies that hit most all of the swap meets in the area. Typically they'll either rechrome and mail back for free or you can get them at the next meet. I'd hit the swap meet and just talk to some of the guys. I know at least one company had a rear bumper for exchange, so you can probably take a look at their work though they'll have lots of finished bumpers there from other makes to look at. Quote Link to comment
SSS510 Posted April 3, 2014 Report Share Posted April 3, 2014 There are horror stories of Shagy and his Chrome plating around. Well, I've had nothing but good experience with Shagy, I've done quite a few bumpers and moldings with him with great results. Quote Link to comment
joek Posted April 5, 2014 Report Share Posted April 5, 2014 http://www.atbumpers.com/Datsun.nxg Hayward ca. Both of mine had dents and they did a good job. $650 for both. Quote Link to comment
Icehouse Posted April 7, 2014 Author Report Share Posted April 7, 2014 Thanks guys! Quote Link to comment
datrod Posted April 7, 2014 Report Share Posted April 7, 2014 I think Shaggy AKA AJ moved to Arizona. Quote Link to comment
Duncan Posted April 8, 2014 Report Share Posted April 8, 2014 I've not used them, but the local Hot Rod guys swear by this place in LA. http://www.verneschromeplating.com/ Quote Link to comment
Abe Froman Posted April 8, 2014 Report Share Posted April 8, 2014 MrBigTanker, Have you used the guy you are suggesting ? Thanks, Quote Link to comment
mrbigtanker Posted April 9, 2014 Report Share Posted April 9, 2014 MrBigTanker, Have you used the guy you are suggesting ? Thanks, No i have not but i was turned on to him by Datrod and upon further research he has been doing it for a very long time,he quoted me between 225-350 a bumper but thats with straigtening and welding up all the holes. Hope this helps. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.