Roberto Posted February 17, 2014 Report Share Posted February 17, 2014 I try to fined some help because my truck stop suddenly I change one of the coils because I notice that had no spark from the coil to the distribuitor and the other coil spark , I change the cable nothing happens , I Check for if it has voltage and it has , so if someone help me with this situation I wold be. Glad thank you Quote Link to comment
dr.feltersnatch Posted February 17, 2014 Report Share Posted February 17, 2014 Follow the ground side of the bad coil. The ground is what fires the coil Quote Link to comment
ggzilla Posted February 17, 2014 Report Share Posted February 17, 2014 Some models of the dual plug engine shut the 2nd coil down to reduce noise. It is normal. But it should fire when idling or something like that. The 2nd coil has its own fuse, so check the fuse box first. Quote Link to comment
datzenmike Posted February 18, 2014 Report Share Posted February 18, 2014 First fuse on the far left side powers the exhaust coil. Quote Link to comment
Roberto Posted March 25, 2014 Author Report Share Posted March 25, 2014 Thank you for your help the problem was the ignition control module . for my friends that try to find one o bought it from ebay at 55 dollars because in autozone the price was 333 dollars, just make sure that you order that right one Quote Link to comment
datzenmike Posted March 26, 2014 Report Share Posted March 26, 2014 Very rare for the module to not work. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.