datsunfreak Posted January 15, 2016 Report Share Posted January 15, 2016 That's a very pretty engine. :thumbup: 1 Quote Link to comment
Jester Posted January 15, 2016 Report Share Posted January 15, 2016 So we are going with a blueprint 306 crate, that will be 390 HP! :frantics: :frantics: :frantics: :frantics: :frantics: :frantics: :frantics: :frantics: :frantics: 2 Quote Link to comment
Anderson521 Posted January 16, 2016 Report Share Posted January 16, 2016 So here we have the 8.8 shortened 2-3/4" on both sides, and using the stock one to measure the pinion angle to weld the new spring pads on. Im lookin to shorten a diff myself, how much did it set you back? Quote Link to comment
Anderson521 Posted January 16, 2016 Report Share Posted January 16, 2016 Btw new engine looks tits Quote Link to comment
q-tip Posted January 16, 2016 Report Share Posted January 16, 2016 Did it not burn tire good enough before? :lol: Quote Link to comment
Bory Posted January 17, 2016 Author Report Share Posted January 17, 2016 No it ran bitchin, blew off all kinds of fast ass show room cars! Including porsche from light to topend! Thanks for the props! Here is my fuel injection I'm running! 2 Quote Link to comment
Bory Posted January 17, 2016 Author Report Share Posted January 17, 2016 The TB is 1" taller than the old 5.0, so I gotta make some room! 4 Quote Link to comment
Bory Posted January 17, 2016 Author Report Share Posted January 17, 2016 Plumbers puffy shows less than one inch available in the center! 2 Quote Link to comment
Jester Posted January 17, 2016 Report Share Posted January 17, 2016 PERFECT! :thumbup: Quote Link to comment
mklotz70 Posted January 17, 2016 Report Share Posted January 17, 2016 Your new engine would fit even better in my '64 Fairlane. :) 1 Quote Link to comment
Bory Posted January 17, 2016 Author Report Share Posted January 17, 2016 Ya Mike, And we wouldn't have to put the radiator in the trunk! Ha! 2 Quote Link to comment
Bory Posted January 20, 2016 Author Report Share Posted January 20, 2016 Im lookin to shorten a diff myself, how much did it set you back? Quote Link to comment
Bory Posted January 20, 2016 Author Report Share Posted January 20, 2016 Sorry, Anderson 521, I think I paid 425 for the axles, c clips are more cus they have to be re splined, and only 40 for housing, but it should have been 700 Quote Link to comment
Bory Posted January 20, 2016 Author Report Share Posted January 20, 2016 Here is what we are using up front, Well these 11.75", rotors, are going back to wilwood, Mike is gonna do me a one off front setup, with 13" rotors up front! Quote Link to comment
Bory Posted January 20, 2016 Author Report Share Posted January 20, 2016 Stand by, photobucket is a pos, at the moment! Quote Link to comment
Anderson521 Posted January 20, 2016 Report Share Posted January 20, 2016 Sorry, Anderson 521, I think I paid 425 for the axles, c clips are more cus they have to be re splined, and only 40 for housing, but it should have been 700 Shit I got quoted at 1200! I'm sure LA has a better selection of shops tho. Thanks man Quote Link to comment
Bory Posted January 23, 2016 Author Report Share Posted January 23, 2016 Look how sick these fronts are gonna look with these 13" wilwoods up front! Thanks to Mike! 1 Quote Link to comment
banzai510(hainz) Posted January 23, 2016 Report Share Posted January 23, 2016 Man you must be Rich!!!!!!! that motor looks nice!!!!!!! Quote Link to comment
Bory Posted January 24, 2016 Author Report Share Posted January 24, 2016 Got some new fans to cover the new fatty rad! 1 Quote Link to comment
Bory Posted January 24, 2016 Author Report Share Posted January 24, 2016 You can see here that by pulling a string, the body line of the rocker matches the step 1 Quote Link to comment
Bory Posted January 24, 2016 Author Report Share Posted January 24, 2016 You can see here, the width of the rear stance, can't wait till the American racing custom 20x 10" with a 6" backspace are done. 1 Quote Link to comment
Bory Posted January 24, 2016 Author Report Share Posted January 24, 2016 So after a quick edit, this is what we are shooting for, 70 corvette yellow, with a touch of black accents. Prolly not going with the rockers in black. 3 Quote Link to comment
Eagle_Adam Posted January 25, 2016 Report Share Posted January 25, 2016 Can't wait to see this one rolling Quote Link to comment
Bory Posted January 26, 2016 Author Report Share Posted January 26, 2016 So went with a 64-66 GT 350 mustang hood scoop from Cj pony parts, the atomic MSD fuel injection and performer intake is gonna be one inch taller, I got super lucky on what I picked, cus the shape of the scoop, and hood are almost a perfect match! Sometimes it's nice to be lucky than good! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.