Bory Posted January 9, 2015 Author Report Share Posted January 9, 2015 Damn dizzy ate up my cam gear. On a $400 cam!! Quote Link to comment
Farmer Joe Posted January 9, 2015 Report Share Posted January 9, 2015 damn... thats a bummer. so it ate up the cam in just the little bit you ran it, or did you swap the gear like you mentioned? Quote Link to comment
Bory Posted January 9, 2015 Author Report Share Posted January 9, 2015 No the china dizzy ate the gears, never put the Msd in. I have stock cam, for that engine, but I hate to run that one, so I'm trying to decide. Quote Link to comment
Mattndew76 Posted January 9, 2015 Report Share Posted January 9, 2015 no more chineses? Quote Link to comment
izzo Posted January 9, 2015 Report Share Posted January 9, 2015 No more chinamen built shits. Japanese or usa onry ror. (for those who don't speak chinamen, that says Japanese or usa only lol) 1 Quote Link to comment
Bory Posted January 9, 2015 Author Report Share Posted January 9, 2015 Oh I'm with Izzo!!! Quote Link to comment
Bory Posted January 20, 2015 Author Report Share Posted January 20, 2015 The cam is hanging out like a tongue. I was not even going to remove engine to pull out cam, not even a little bit! 2 Quote Link to comment
Cpl620 Posted January 20, 2015 Report Share Posted January 20, 2015 haha thats gold! probably the funniest shit ive seen in a bit, but i dont blame you at all. Quote Link to comment
Bory Posted January 20, 2015 Author Report Share Posted January 20, 2015 Ya I can make a removable plate or just use a floor pan plug! Felt weird using a holesaw to make access for the cam, but oh well- 1 Quote Link to comment
Bory Posted March 3, 2015 Author Report Share Posted March 3, 2015 Finally got it back on the road! Has the stock can back in it, but it still sounds real cool!! 2 Quote Link to comment
Bory Posted March 3, 2015 Author Report Share Posted March 3, 2015 Cam that is- Quote Link to comment
bonvo Posted March 4, 2015 Report Share Posted March 4, 2015 Glad you still have this 1 Quote Link to comment
denmarkboy Posted March 5, 2015 Report Share Posted March 5, 2015 ^^^^ X2 , so much work . who deserves it besides you , the creature ! Quote Link to comment
Bory Posted March 5, 2015 Author Report Share Posted March 5, 2015 Thanks guys! Quote Link to comment
Bory Posted March 5, 2015 Author Report Share Posted March 5, 2015 I found that the oil cooler I was running at the rear of the truck and about 25' of 1/2" lines, added way too much drag to the cam gear, thus the failure to longevitize. So now no cooler, remote oil filter only, and a nice Msd dist. Almost afraid to drive it!! Quote Link to comment
Jester Posted March 6, 2015 Report Share Posted March 6, 2015 What about putting a scavenge pump in the cooler lines. Just have to make sure the pump doesn't suck the lines flat and pinch off the supply. Quote Link to comment
Bory Posted March 9, 2015 Author Report Share Posted March 9, 2015 With all this stuff I pulled away from some bran new Denali that would not let me get over! He was pissed!! Denali boy- meet Datstang! 2 Quote Link to comment
Bory Posted April 23, 2015 Author Report Share Posted April 23, 2015 Pulled out new dist, to check for break in, and it looks tits. 1 Quote Link to comment
datsunfreak Posted April 24, 2015 Report Share Posted April 24, 2015 Why the V8 badge? Killing the sleeper image... ^_^ And if you want to advertise, why not one of these?!? :lol: Quote Link to comment
Bory Posted April 24, 2015 Author Report Share Posted April 24, 2015 I like that! Quote Link to comment
Bory Posted May 4, 2015 Author Report Share Posted May 4, 2015 The soccer balls are sitting on the cutouts, exhaust that is! 1 Quote Link to comment
Bory Posted September 22, 2015 Author Report Share Posted September 22, 2015 This is what the driver of an 03 porsche Boxter saw when I took him from a light to 6000 RPM IN 4th gear. It was close but I took him by 2 car I mean truck lengths. Ruined his weekend!! For shizzle! Gotta love a sleeper, carrying trash cans. 3 Quote Link to comment
Jester Posted September 24, 2015 Report Share Posted September 24, 2015 :rofl: :rofl: :rofl: :rofl: :rofl: :rofl: :thumbup: Quote Link to comment
Bory Posted December 29, 2015 Author Report Share Posted December 29, 2015 Well time for a power rack and pinion, I'm using a fox body quick ratio, starting with a cardboard X member Quote Link to comment
Bory Posted December 29, 2015 Author Report Share Posted December 29, 2015 Here I transferred to 1x2" tubing. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.