squatches Posted September 29, 2013 Report Share Posted September 29, 2013 Are there any other throttle cables that screw into the firewall like original 1200 one that are longer? I need one that will almost reach the radiator support, I looked around with very little luck. but did find that the 620 diesel cable may come close to the length i need just looking to see if there are any other ones that may work. thanks Quote Link to comment
datzenmike Posted September 29, 2013 Report Share Posted September 29, 2013 The 521 screws into the firewall but no way will reach that far. A 720 Z series engine has the manifold and carb on the passenger side. The cable is quite long to reach way over there and also has to pull towards the fender side so even longer to loop around. Better is a throttle cable from a '80-'83 200sx. They have a Z series motor with EFI and the throttle plate is way out near the battery on the passenger side. Best bet is a KA24E cable from an S13 is perhaps even longer. Neither of these screw into the firewall but they bolt on. A couple of self tapping tech screws will fix that. Why do you need to be out by the rad support? Is this a draw through turbo? Quote Link to comment
squatches Posted September 30, 2013 Author Report Share Posted September 30, 2013 yeah its for a draw thru setup, i may go ahead and get one of the diesel truck cables and if its to short ill get the ka one. just like to see it there were any options before i went with a custom route. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.