Jump to content


Photo
- - - - -

I am looking for an L series Intake manifold


  • Please log in to reply
9 replies to this topic

#1 GreaseMonky

GreaseMonky
  • Location:Vancouver
  • Cars:70 510 2dr, 71 510 KA24DE Goon, 75 610 2dr coupe (dirt track car) 71 1200 coupe, 72 1200 coupe

Posted 02 May 2013 - 11:45 PM

I am looking for a intake manifold for a L series engine we are putting together, either a single side draft, would prefer a Lynx, or a aftermarket down draft such as a Edelbrock, or a Cannon, or a Offy if its not a dual plane


My 2dr 510 dirt trac car build http://community.rat...__fromsearch__1

My 610 coupe dirt track car build http://community.rat...__fromsearch__1

My 510 KA24DE powered Goon build http://community.rat...__fromsearch__1

#2 H5WAGON

H5WAGON
  • Location:Eugene, Oregon.
  • Cars:1970 510 Wagon & 1970 510 Wagon Automatic

Posted 03 May 2013 - 12:33 AM

I have a Offy....it's a dual plane, but was altered.
I can send pic tomorrow.?


1970 510 Wagon......L20B,Weber 32/36.........5spd  http://community.rat...1970-510-wagon/
1970 510 Wagon......L16, Weber 32/36....Automatic
California Day Dream..... http://i1205.photobu...ODItMS5qcGc.jpg My 1st Wagon. :)
KA-Swap Wagon, I Sold.... :crying: http://community.rat...rneywroad-trip/

#3 banzai510(hainz)

banzai510(hainz)

Posted 03 May 2013 - 05:46 AM

aftermarket down draft such as a Edelbrock, or a Cannon, or a Offy if its not a dual plane



why not match port the stock L16 one???????? ports and the top pf the manifold where the carb sits on open them up also/ dremel tool and polish it up.

persoanlly the air has to still have to do that 90deg bend.

by far the most noticble improvent has been bolt on a 38/38 as its just 4 bolts if one already has a 32/36 set up on there. but rememebr its isnt going to be V8 power
Throw on some Weber sidedrafts, Rising Sun hood.... call it good

#4 GreaseMonky

GreaseMonky
  • Location:Vancouver
  • Cars:70 510 2dr, 71 510 KA24DE Goon, 75 610 2dr coupe (dirt track car) 71 1200 coupe, 72 1200 coupe

Posted 03 May 2013 - 06:54 AM

H5 yes I would be interested in some pics.
My 2dr 510 dirt trac car build http://community.rat...__fromsearch__1

My 610 coupe dirt track car build http://community.rat...__fromsearch__1

My 510 KA24DE powered Goon build http://community.rat...__fromsearch__1

#5 GreaseMonky

GreaseMonky
  • Location:Vancouver
  • Cars:70 510 2dr, 71 510 KA24DE Goon, 75 610 2dr coupe (dirt track car) 71 1200 coupe, 72 1200 coupe

Posted 03 May 2013 - 06:58 AM

aftermarket down draft such as a Edelbrock, or a Cannon, or a Offy if its not a dual planewhy not match port the stock L16 one???????? ports and the top pf the manifold where the carb sits on open them up also/ dremel tool and polish it up.persoanlly the air has to still have to do that 90deg bend.by far the most noticble improvent has been bolt on a 38/38 as its just 4 bolts if one already has a 32/36 set up on there. but rememebr its isnt going to be V8 power


Its for a circle track car, rules allow only 1 carb, no 4 barrels
My 2dr 510 dirt trac car build http://community.rat...__fromsearch__1

My 610 coupe dirt track car build http://community.rat...__fromsearch__1

My 510 KA24DE powered Goon build http://community.rat...__fromsearch__1

#6 GreaseMonky

GreaseMonky
  • Location:Vancouver
  • Cars:70 510 2dr, 71 510 KA24DE Goon, 75 610 2dr coupe (dirt track car) 71 1200 coupe, 72 1200 coupe

Posted 07 May 2013 - 12:29 AM

I have a Offy....it's a dual plane, but was altered.
I can send pic tomorrow.?

would still like a pic


My 2dr 510 dirt trac car build http://community.rat...__fromsearch__1

My 610 coupe dirt track car build http://community.rat...__fromsearch__1

My 510 KA24DE powered Goon build http://community.rat...__fromsearch__1

#7 H5WAGON

H5WAGON
  • Location:Eugene, Oregon.
  • Cars:1970 510 Wagon & 1970 510 Wagon Automatic

Posted 07 May 2013 - 02:59 AM

Sorry been slackin...I will get pic tomorrow.

 

Runners for dual plane have been ground away, right under carb area.......taking away Dual plane function.


1970 510 Wagon......L20B,Weber 32/36.........5spd  http://community.rat...1970-510-wagon/
1970 510 Wagon......L16, Weber 32/36....Automatic
California Day Dream..... http://i1205.photobu...ODItMS5qcGc.jpg My 1st Wagon. :)
KA-Swap Wagon, I Sold.... :crying: http://community.rat...rneywroad-trip/

#8 H5WAGON

H5WAGON
  • Location:Eugene, Oregon.
  • Cars:1970 510 Wagon & 1970 510 Wagon Automatic

Posted 07 May 2013 - 08:06 PM

IMAG5783.jpg

IMAG5782.jpg

IMAG5785.jpg


1970 510 Wagon......L20B,Weber 32/36.........5spd  http://community.rat...1970-510-wagon/
1970 510 Wagon......L16, Weber 32/36....Automatic
California Day Dream..... http://i1205.photobu...ODItMS5qcGc.jpg My 1st Wagon. :)
KA-Swap Wagon, I Sold.... :crying: http://community.rat...rneywroad-trip/

#9 goichi1

goichi1
  • Location:Oak Harbor, WA
  • Cars:1972 wagon

Posted 08 May 2013 - 08:56 PM

I am looking for a intake manifold for a L series engine we are putting together, either a single side draft, would prefer a Lynx, or a aftermarket down draft such as a Edelbrock, or a Cannon, or a Offy if its not a dual plane

I'm still looking for the two tanks that I paid you $150.00 for a long time ago....but I haven't forgot that I never received them.....or a refund. 

 

 

EDIT: yea, another worthless PM ( his reply below), I'll just gather all them up and post so the world can see just who you are and how you take care of your biz.....come on and send me the parts or my money back.  It's been how long?????????



#10 GreaseMonky

GreaseMonky
  • Location:Vancouver
  • Cars:70 510 2dr, 71 510 KA24DE Goon, 75 610 2dr coupe (dirt track car) 71 1200 coupe, 72 1200 coupe

Posted 08 May 2013 - 09:38 PM

I'm still looking for the two tanks that I paid you $150.00 for a long time ago....but I haven't forgot that I never received them.....or a refund. 

 

pm'd


My 2dr 510 dirt trac car build http://community.rat...__fromsearch__1

My 610 coupe dirt track car build http://community.rat...__fromsearch__1

My 510 KA24DE powered Goon build http://community.rat...__fromsearch__1