Need a picture of an Automatic in a 510

[Gensaiken]

I need a picture of an automatic in a 510.

 

More specificly a picture of where the cooling lines from the radiator go to the transmission. Mine lines are sort of ghetto rigged to stay in place. I know there is supposed to be something connected to the bell housing or some where else that is supposed to be supporting the lines.

 

 

So any photos would be greatly appriciated. :D

[datzenmike]

http://i138.photobucket.com/albums/q251/datzenmike/IMG_0170.jpg[/img]"]

 

This is a 3N71B from a '78 truck. Except for the longer tail stock it should match the 510 JATCO tranny, at least visually. (maybe not the early Borg Warner 35)

[мг.пιѕмο]

Muncie B/W's lines are both on the passenger side, and have a supporting mount that attaches to one of the oili pan bolts on the side beneath the starter, as well as the the very front, where one aims towards the driver's side, and the other the passenger. (Old crap radiator type).

 

FWIW, Don't use the rad for a cooler. Install another cooler, and put a magnefine filter in-line.

[Gensaiken]

Muncie B/W's lines are both on the passenger side, and have a supporting mount that attaches to one of the oili pan bolts on the side beneath the starter, as well as the the very front, where one aims towards the driver's side, and the other the passenger. (Old crap radiator type).

 

FWIW, Don't use the rad for a cooler. Install another cooler, and put a magnefine filter in-line.

 

Hmm, I might just do that. Right now the lines are all ghetto rigged. I'm sure that some one took off all the stock mounts. I know it'll be a bitch to find em agian.