Jump to content

Gotti 140-US 3 Piece 14x7 4x114.3 (PNW)


Recommended Posts

I hope the admins don't lock this.  I made this account just to post these wheels. I'm very active in the BMW community and was going to put these on my E21 with adapters, but decided against it.

 

I have a set of Gotti 140-US for sale.

14x7

4x114.3

I measured the offset at ET6

 

The centers were blasted and are ready for powder or paint. The wheels are in pretty good shape. I took photos of the worst pitting on the faces and on the lips themselves. They are true wheels and have no signs of bends. I also still have the aluminum washers which were used on the back of the wheels. The original hardware was too rusty to keep, but they had button head cap screws originally. The wheels accept a normal 1/4-20 fastener so that makes the hardware selection pretty wide, cheap and easy to procure. The lips have a number "2" on them which is pictured below. I think this is the width of the lip, because they are indeed 2". I did not have these numbers intentionally polished out, but you can see they are fading. I have seen these wheels on the internet and they supposedly take Datsun centercaps from a 240Z or 510 of the era. I have not confirmed this yet.

 

As is: No hardware other than the aluminum washers and the raw blasted centers -- $750

 

Shipping at your expense if needed.

 

8659661606_3d3752d515_c.jpg

 

8658560137_d39f803b2c_c.jpg

 

8659663500_91f88d081e_c.jpg

 

8659663220_064405a546_c.jpg

 

8658558483_9fbf7d7479_c.jpg

 

8659662714_b5ae7ac3ac_c.jpg

 

8658557981_5ec46e9fdc_c.jpg

 

8658557669_e595f35b61_c.jpg

 

8659662000_84d02cd7b4_c.jpg

 

8658556829_9858d0a1f5_c.jpg

Link to comment
  • Replies 12
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

  • 2 weeks later...
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.