Ryoskatekov Posted April 6, 2013 Report Share Posted April 6, 2013 * NOTE that i directly copied it from a thread of mine in another forum so some of the things make no sence! LOL *oh boy... another build here and this one was... well... Un-intentional lets just say. gah, here's the story So one day, I was going around bunch of good-wills' in search of cheap Hip-hop CDs down here in houston and on the way home I decided to visit the local antique ( JUNK ) shop just to make sure... and came across this.. A mid century Velvet treads with St.pierre system, loose ball clay wheels and Hyde boots... and the price tag was 60 bucks. Not cheap Not expensive, walking around mourning at the antique shop, I decided to buy the damn skates since the store was closing in 30 min or so (yes... thats how much I thought about it) I can't help myself but to buy old skates that are just sitting sad like that... Betty lytle I guess? Well this isnt going to be too bad... is it? Trust me... I've seen worse at work at the skate counter.. Squeaky clean. (Anybody know what these cartridged "loose ball" bearings are called? It was only used in 3 of the 8 wheels) Loose ball fun. Dirty Slimy balls everywhere up in this *beep* Now that I have most of the greasy grease thats however old they are removed, time to get to mild-core metal polishing. (Don't look twice... your eyes are perfectly fine, its my wobbly fingers) Who knew rust could eat up RUBBER ? One side down... One more to go. well thats it for day 1. 4 Quote Link to comment
Ryoskatekov Posted April 6, 2013 Author Report Share Posted April 6, 2013 It was right in middle of the night... only power tool I could use was my poor thumb and a rag Quote Link to comment
Ryoskatekov Posted April 6, 2013 Author Report Share Posted April 6, 2013 Getting on a time machine and skipping to day 2. Now that all the parts are clean and functional its time to visit the mall for some shoe shopping ( The bettys' were wearable... but 1. A little too big, 2.pads crumbling up. 3. Needs leather work which I dont specialize in. ....... Vinyl... cheap...terribly made... not even sawn togather. Oh F*** it I spent enough on the plates already. But there was a major down side to it (as you can expect) The genius that made the boots used even more squishy material for the Sole and heel and everywhere else, and the other genius that bought it didin't pay attention. Well.... the detachable functionality is going bye bye... The screws just slimes right out by hand. Looks like I'm going to have to go with direct bolt on.... But because I'm a skate hoarding animalist psycho that keeps dead skates in the freezer. Instead of popping the st.pierre system right off, I decided to keep it for fun. just wont be functional thats all.. Power tools <3 And here's the mock up... looking pretty good Quote Link to comment
Ryoskatekov Posted April 6, 2013 Author Report Share Posted April 6, 2013 Too late for Hardware store.. They close at 5 on sundays. damn. see, when you're a Asian immigrant un-native to U.S. with parents that doesn't skate, you lack so much tools that you don't even have a Bolt breaker or extra mounting hardware. so no more fun for me today. gotta wait till tommorow to get some hardware after school. Quote Link to comment
Ryoskatekov Posted April 6, 2013 Author Report Share Posted April 6, 2013 No place for homework :biggrin: Anyways, I'm too lazy to go to the hardware store so I went bolt hunting in my own room... jackpot... But then I realize I dont have any washers or nylock nuts... Darn... Quote Link to comment
Ryoskatekov Posted April 6, 2013 Author Report Share Posted April 6, 2013 Scored some Tools they were like 4 to 9 bucks each on sale.. even that ratcheting tight space wrench thingy. Works really well when you need to reach the toes. Oh and sorry Mr.Shelby but the T-nut is guna have to be "Next Time" lol :tongue:... I just don't feel like breaking bolts today... already sawed off 4 bolts. I should go outside and play soccer with this. Beautiful! If this skate was a chick, I'd give it 9 out of 10. :biggrin: Now the skates will sit here sadly until rhetttro ships his wheels :rolleyes: also ordered some single action cushion for Laser which I'm hoping will fit the Velvet Treads.... Quote Link to comment
Ryoskatekov Posted April 6, 2013 Author Report Share Posted April 6, 2013 Vanguard red devils came in :) Only with Deep dish wheels like this will this ever happen..... and to make it better I lost one loose ball in the process... glad I had a spare. well, here is the mock up until the cushions arrive and some alternative for the washer since rubber didint work with the weird headed chicago kingpin that I CANT REPLACE LOCALLY because of the thread pitch.... Well thats it for right now. Quote Link to comment
Ryoskatekov Posted April 6, 2013 Author Report Share Posted April 6, 2013 ALL right, Crazy head Ryoskate headed to the hardware store at 8 in the morning and got these lil washers. Got 4 nylon shoulder washers, 4 nylon flats,(suggested by dillo) 4 metal flats, 16 spare loose ball 3/16. and a 3/8? washer that should fit like laser did (as suggested by Mr.shelby) Here's how it looks now. Guna test them after work today. The reason why it still has the Flathead bolt is because the suregrip bolt was too long for the plate. when i come home i will have to cut it with a hack saw... *shiver* the washer for the cushion looks a tad small but dont worry, its a 7/8 cushion puffed up from abuse of the previous owner ending up at amazing dia of 1inch lol.... I bought metal and nylon washer to see which one works better.. I will test fibers later but really, I DONT HAVE TIME RIGHT NOW... I got work in 30 mins. 11:30 to 5 at Dairy ashford (come see me if your close enough LOL) Quote Link to comment
Ryoskatekov Posted April 6, 2013 Author Report Share Posted April 6, 2013 Skated them at funplex which had "uncoated" floor. (coating gone from abuse rofl... and they never re-coat) had a blast sliding :D The vanguards slide when I want to and grip when needed. man these things are fun. Lot of new tricks I couldn't do, now possible with this skate. well my chicagos are complete, I guess thats end of this thread. Thanks to all those who helped and commented. Peace -Ryosuke Quote Link to comment
fisch Posted April 7, 2013 Report Share Posted April 7, 2013 That was a trippy post. I loved it. I didn't realize there was an underground ratsun for skaters. you are gonna need a few more tools to work on a Datsun though! 1 Quote Link to comment
Jdm720 Posted April 7, 2013 Report Share Posted April 7, 2013 I've been amused. Props :thumbup: Quote Link to comment
bonvo Posted April 7, 2013 Report Share Posted April 7, 2013 very unusual project but props man those look classy nice work Quote Link to comment
tr8er Posted February 25, 2014 Report Share Posted February 25, 2014 Dopeness. How are these doin? Quote Link to comment
datrod Posted February 28, 2014 Report Share Posted February 28, 2014 Weird, But cool at the same time. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.