nissanprerunnerdavid Posted May 9, 2012 Report Share Posted May 9, 2012 Anybody know where to get a semi decent piston and r:ing set. I have only found them at Jerry's for 225$ it so seeing if you guys haveany links,connections or anything let me know. Thanks. Quote Link to comment
banzai510(hainz) Posted May 9, 2012 Report Share Posted May 9, 2012 You try Rockauto.com???????? I dont know Z series Motors or if these are the correct ones from Silvolite.USA http://www.kb-silvolite.com/silv-o-lite/spistons.php?action=Mfg4l&mfg=Nissan&Div=Nissan&l=2389 Try Sealed Power brand(these were USA Sterling) Try Summit racing. But I dont know the site Quote Link to comment
nissanprerunnerdavid Posted May 9, 2012 Author Report Share Posted May 9, 2012 awesome!! i will check these out. and yeah i did try rock auto but they didnt tell me the brand. thanks!! Quote Link to comment
nissanprerunnerdavid Posted May 9, 2012 Author Report Share Posted May 9, 2012 http://www.summitracing.com/parts/SLP-4K13598PA1-0/ heres what i found. piston diameter is 90.00mm which it the same as .020over right?? and also it say they have no valve relief and i was wondering if that is a bad thing?? Quote Link to comment
poopypants720 Posted May 9, 2012 Report Share Posted May 9, 2012 Nismo catalog still shows parts for our trucks... Quote Link to comment
banzai510(hainz) Posted May 9, 2012 Report Share Posted May 9, 2012 I say consult with datzenmike to make sure your getting the right piston sets/ in application this shows only 91-92 build years for the summit pistons. there alot of 2.4 liters but could be different motors. Quote Link to comment
poopypants720 Posted May 9, 2012 Report Share Posted May 9, 2012 Btw.... Be really careful with how big you go, only do what you need to set things right...these motors (z24) is already notorious for blowing head gaskets between cylinders... GL bro... Maybe call any machine shops around where you live that do rebuilds and ask who they would use. Actually I'm in front of my machinists shop right now waiting for them to finish pressing in my new u joints... I'll see if I can get a phone number or website for the parts source they used for my rebuild. Quote Link to comment
nissanprerunnerdavid Posted May 10, 2012 Author Report Share Posted May 10, 2012 alright. and im going with the bare minimun. im only boring it as far as i need to haha. no more and no less. but finding a set of rings and pistons for under 2 hundo is tough... Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.