Jump to content


Photo
* * * * * 1 votes

Some Datsun 510 parts, l20b, (header is sold!!!) and some other stuff


  • Please log in to reply
22 replies to this topic

#1 spudly13

spudly13
  • Location:Stanwood, Wa
  • Cars:Datsun 510, Building a 260z

Posted 21 February 2012 - 10:40 PM

I have some spare stuff laying around that i know longer need if my prices seem unreasonable let me know, i dont have much idea what a lot of this stuff is worth

Located in stanwood wa, prefer pickup or meet up but will ship (exception of the motor and header)

Datsun 1600 OHC valve cover, was in the process of polishing, needs to be finished. 30$
Long Tube header, ran on both an l16 and l20 in my 510 100$
2 barrel carb intake manifold 20$
Radiator shroud 10$

L20b, just came out of my 71 510, ran when pulled a few weeks ago, leaky valve guides (hve new ones), front cover gaskets leaked a little, has a ported head on it, pretty quick motor. Good compression
Flywheel
oil pump
fan
fan pulley
waterpump
new headgasket in it
crank pulley
alternator
Good clutch and pressure plate

Almost complete, no distributer it stayed in my car, willing to part the motor out or take it away for 125$

you can pm or Email spudly13@msn.com
id also be in interested in a part trade (cash on my end) for a set of wheels, either 13 14 15 or 16 by 7 or 8



#2 spudly13

spudly13
  • Location:Stanwood, Wa
  • Cars:Datsun 510, Building a 260z

Posted 25 February 2012 - 03:56 PM

lowered my prices

#3 spudly13

spudly13
  • Location:Stanwood, Wa
  • Cars:Datsun 510, Building a 260z

Posted 25 February 2012 - 04:06 PM

Posted Image
Posted Image
Posted Image
Posted Image
Posted Image

#4 albyneau

albyneau
  • Location:Northern CA
  • Cars:1972 521, 3 Chevy trucks, 2 corvairs, 2 Harleys, and....

Posted 25 February 2012 - 04:12 PM

Posted Image


:lol:Any symbolism to the fact it's layin under a fresh SBC?:lol:

If you were closer that L20'd be gone already.... PM'd

There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order.

#5 spudly13

spudly13
  • Location:Stanwood, Wa
  • Cars:Datsun 510, Building a 260z

Posted 25 February 2012 - 04:58 PM

pm replied, and that lt1 is for my 260z project :)



#6 EricJB

EricJB
  • Location:skagit valley wa
  • Cars:76 660z, 72 240z 72 521, 67 411sss 77 620 KC 91 Mercedes 500SL several fords

Posted 25 February 2012 - 08:59 PM

PMed

http://community.rat...seal-installer/  Sold out for now. Thank you.


#7 spudly13

spudly13
  • Location:Stanwood, Wa
  • Cars:Datsun 510, Building a 260z

Posted 25 February 2012 - 10:06 PM

PMed


replied

#8 Radim

Radim
  • Location:Santa Ana, CA
  • Cars:'73 620, '91 LS400, '74 Z, '01 GS300 '69 521 '74 KZ400

Posted 25 February 2012 - 10:09 PM

Sellin that sweet turbo hat?

#9 spudly13

spudly13
  • Location:Stanwood, Wa
  • Cars:Datsun 510, Building a 260z

Posted 25 February 2012 - 11:25 PM

the one bolted to the intake manifold that i made? sure lol if you wanna buy it, its for sale

#10 spudly13

spudly13
  • Location:Stanwood, Wa
  • Cars:Datsun 510, Building a 260z

Posted 26 February 2012 - 07:08 PM

Hey ill be headed down to seattle tomorrow around noon-ish, if you need anything it would be a great time to meet up

#11 GreaseMonky

GreaseMonky
  • Location:Vancouver
  • Cars:70 510 2dr, 71 510 KA24DE Goon, 75 610 2dr coupe (dirt track car) 71 1200 coupe, 72 1200 coupe

Posted 26 February 2012 - 11:55 PM

you ever make it down towards the portland direction?
My 2dr 510 dirt trac car build http://community.rat...__fromsearch__1

My 610 coupe dirt track car build http://community.rat...__fromsearch__1

My 510 KA24DE powered Goon build http://community.rat...__fromsearch__1

#12 spudly13

spudly13
  • Location:Stanwood, Wa
  • Cars:Datsun 510, Building a 260z

Posted 27 February 2012 - 09:39 AM

Hey ill be headed down to seattle tomorrow around noon-ish, if you need anything it would be a great time to meet up



Not anytime soon, the farthest i generally make it is tacoma

#13 spudly13

spudly13
  • Location:Stanwood, Wa
  • Cars:Datsun 510, Building a 260z

Posted 29 February 2012 - 10:35 AM

.....

#14 banzai510(hainz)

banzai510(hainz)

Posted 29 February 2012 - 11:16 AM

in the photo under the torbo intake is that a L motor flywheel? a lightweight one? I see its countersuck in back.
Throw on some Weber sidedrafts, Rising Sun hood.... call it good

#15 spudly13

spudly13
  • Location:Stanwood, Wa
  • Cars:Datsun 510, Building a 260z

Posted 29 February 2012 - 02:12 PM

Its an l20 flywheel, not sure if its lightweight? Came in the car when I bought it, ill take more pictures of it and post them

#16 spudly13

spudly13
  • Location:Stanwood, Wa
  • Cars:Datsun 510, Building a 260z

Posted 29 February 2012 - 06:35 PM

pics of the flywheel:


Posted Image

Posted Image
Posted Image
Posted Image

#17 banzai510(hainz)

banzai510(hainz)

Posted 29 February 2012 - 07:54 PM

you know if a 200mm.?????? I never seen a stock one counter sunk like that.
weigh it if possible this might be a keeper.Does it look like it got machined on the back side????

If 200mm even better id give you 40 bucks if you ever down south and need to get rid of it bad. Renton /Covington area.
PM
Throw on some Weber sidedrafts, Rising Sun hood.... call it good

#18 banzai510(hainz)

banzai510(hainz)

Posted 01 March 2012 - 06:17 AM

Spud I got you meassage but cant PM back for soem reason

L20 cars had 200mm flywheels
L20 trucks had 225mm flywheels.
Could have been anything in your car. 5 speed dont matter
I know a guy at Autosport in seattle a long time ago want a 225mm from a 6 cylinder and was factory light weight. This could be it. But its in 225. Just wondering if by chance they made one 200.

Youll have to use a tape measure across the surface of the disc.
Throw on some Weber sidedrafts, Rising Sun hood.... call it good

#19 spudly13

spudly13
  • Location:Stanwood, Wa
  • Cars:Datsun 510, Building a 260z

Posted 01 March 2012 - 09:17 AM

It weighs roughly 17.4 pounds and measures almost exactly 8 inches accross the disk which would put it just barely over 200mm

If im ever down that direction ill let you know if your interested, but i do have a motor sale pending this afternoon, we'll see how that goes

#20 banzai510(hainz)

banzai510(hainz)

Posted 01 March 2012 - 04:42 PM

OK if your down this way Ill give you 40$ for it
253 653 3690 Hainz.
Im in no rush or if you have a buyer up there that is closer sell it it to them forwhatever.

I have a 200mm now but swear its over 20pounds The truck 225 are HEAVEY!!!!!!!
Throw on some Weber sidedrafts, Rising Sun hood.... call it good